Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
#7001
Re: Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda
pay pal accepted
Tech
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
OMR SUBCAGES available:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600/750 -00, 01, 02, 03, 04, 05<<<click here
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
pay pal accepted
Tech
- The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
#7003
#7005
#7006
#7007
#7012
Thread Starter
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Re: Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
thats the easiest way to learn right cause you don't have to lean the bike but when you get better at going right you will do them the same way you go left ..leaning off to go left is hard because of your brake foot
#7013
#7014
Re: Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
hey roger i got a question,
i got the bike running tonight, but when you pull on the throttle cables the bike is still at idle?... im guessing the cables got detached some how, cause the last time the bike was running chito was just pulling the cables and the bike would rev..
i got the bike running tonight, but when you pull on the throttle cables the bike is still at idle?... im guessing the cables got detached some how, cause the last time the bike was running chito was just pulling the cables and the bike would rev..
#7015
Thread Starter
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Re: Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
i have a 62 on the rear and i ran a stock front for years but i needed to change my gear ratio for the approach at stunwars so i went down one in the front cause thats all i could find at the moment , i would have prefered changing the rear but no one had what i needed
#7016
Thread Starter
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Re: Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
hey roger i got a question,
i got the bike running tonight, but when you pull on the throttle cables the bike is still at idle?... im guessing the cables got detached some how, cause the last time the bike was running chito was just pulling the cables and the bike would rev..
i got the bike running tonight, but when you pull on the throttle cables the bike is still at idle?... im guessing the cables got detached some how, cause the last time the bike was running chito was just pulling the cables and the bike would rev..
#7017
#7019