You guys wanna hear something weird with my rear brake? It probably happens on all bikes

 

hey chito i got the starter, i just relized it was sitting next to me here at work lol

 

what happens with your r brake?

 

shoot

 

OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda

• CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years <<< click here
• CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07 08<<< click here

Suzuki

• GSXR 600/750 -00, 01, 02, 03, 04, 05<<<click here
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08

$175 Shipped
pay pal accepted

Tech

• The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!!!!!

>>click here to see why i only sell folding peg subcages<<

 

the other day im at a spot that has pavement leading up to a brick wall thats good for stalling on. I was practicing coming up to the wall at a 45 angle, planting the front tire on it, then pushing off with my foot.

Sometimes Id pull in the clutch too early, and plant the front tire too low on the wall, and there would be a lot of backwards pressure on the brake. 2 or 3 times, as i released the brake a little to let the front wheel roll down the wall, the reversing caused the brake to fail instantaneously.
as the back wheel rolled backwards, it did something to the brake system. right after, the brake would need to be pumped back up to operating pressure.

one time, i pumped it up after doing that, then on my next wheelie it lost pressure after 2-3 taps of the brake. I looped it, going real slow luckily.

 

Miles To Go: 255 Miles

and im looking at an 80 right now. 4 legs to go. i cant wait to see what iron ore is paying

 

You have completed your route to Melbourne on time. You collected $1,664.38 of which P.A.R. Trucking collected $199.73 from that total to leave you with a total collection of $1,464.65. Your driver rating is now 30.63. You may start a new route at this time or view your driver profile for more details.

 

strange , the caliper shouldn't be affected ...

is your caliper mount moving when the bike goes backwards ?

 

30 Day Route Earnings: $100,359

I finally broke a hundred

 

 

huh,scarry ****,before 1-2 months crashed with my 100 ccm bike,i was doing sit down rew limit coaster,and i broke brake line,it all happened pretty fast,and ofc i looped it.

 

finally i have everything i need to get my bike started, minus a dead battery .. but ill just have to jump it everytime.. im cool with that for now

 

the caliper floats on the mount, you know, the stock honda 1 piston. my theory is that the caliper gets twisted when it gets forced in the wrong direction, and therefore the pad gets twisted inside the caliper, as the pad must stay flat to the rotor. So I think all that, forces the piston in a couple mm, and then as soon as the pressure is off slightly, the piston can go back out, and thats where the pressure loss comes from.

 

im gonna test it some more next time i can ride. and i want to try neals bike because he has the hohey 4 piston setup

 

Why don't you just buy a battery?

 

i've looped the fiddy pretty hard core a few things... mostly trying to shift into 2nd lol

 

 

+1,or just take battery from someone,just for start bike...

 

cause i still have to buy a crash cage, and a subframe... if i had the money for it all trust me i would buy a battery in a heart beat. lol