Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
#4661
Re: Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
Niner , i just did some injectors and glow plugs on a 2001 444e this week and the #8 injector is a different part# than the rest . It looks the same as the rest (except a blue harness connector on top and a "LL" stamped on it on top) , but from what i have read up on it , is that it has a way of oil return different from the rest . Called the DeadHead injector .
If you remember when i said the newer model 444e's had more trouble starting in sever cold weather , compared to earlier models , i was thinking that something might be hanging up inside the #8 injector , causing the whole bank to drain oil , causing none of the injectors to fire on that side of the engine .
I could be wrong on that theory though
If you remember when i said the newer model 444e's had more trouble starting in sever cold weather , compared to earlier models , i was thinking that something might be hanging up inside the #8 injector , causing the whole bank to drain oil , causing none of the injectors to fire on that side of the engine .
I could be wrong on that theory though
The #8 injector is different because one of the neighboring injectors (I forget which one) fires very close in the sequence and the pressure of the high pressure injector oil drops for the #8 injector. Again HEUI sucks. I want a CR Cummins in my truck.
#4664
Re: Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
I think the design of heui is ok if it is firing good . I dont think you can beat the smoothness of a V8 cyl diesel .
Last edited by Crazy D; 01-24-2009 at 11:14 PM.
#4665
Re: Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda
pay pal accepted
Tech
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
OMR SUBCAGES available:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600/750 -00, 01, 02, 03, 04, 05<<<click here
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
pay pal accepted
Tech
- The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
#4669
Re: Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
If you're tight on cash you can take them out , and test them with a jumper wire and a battery . They will glow instantly if you put 12volts to them
#4670
#4671
#4676
#4677
Re: Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
Also just noticed i have a few pics of an all black challenger when it first showed up at the local dealer this fall if anyones interested .
#4680
Re: Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
I wish there was a good kelm thread or something. Just a thread about a 14 year old donut eater and his little ho bag who is smooching some other hoser who hasn't hit puberty yet.