OMR SUBCAGE [subframe cage]
#7261
Re: OMR SUBCAGE [subframe cage]
OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda
pay pal accepted
Tech
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
OMR SUBCAGES available:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years
- CBR 600RR - 03 , 04 , 05 , 06 , 07 <<< click here
- GSXR 600/750 -00, 01, 02, 03, 04, 05
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
pay pal accepted
Tech
- The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position!
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
#7262
Re: OMR SUBCAGE [subframe cage]
The first day when I went to start I realized I didnt have the right tools. Went to the 5 stores and couldnt find what I needed so I borrowed them from a friend. When I went to start the next day I realized he gave me 3/8" drive (which I already had) instead of the 1/4" drive hex sockets but luckily I had already ordered the 1/4" drive which came the next day. So yeah I guess you could count that as 3 days lol. Once it was on though, which only took me about 30 minutes to remove the old one and put the new one on, I adjusted it and thought it was good. Then rode to Mikes house and thought it wasnt adjusted right. I then adjusted and readjusted it at roughly 5-7 times. BUT when I finally had 2 people listen to it that know what theyre doing, they both said it was adjusted right So I probably wasted an additional 1 1/2 hours lifting the tank and adjusting it so many ****** times
#7267
Re: OMR SUBCAGE [subframe cage]
#7269
Re: OMR SUBCAGE [subframe cage]
#7270
#7272
#7274
#7276
Registered User
Join Date: Jun 2007
Location: Im Lost. I have gone to look for myself, so if
Posts: 6,856
Re: OMR SUBCAGE [subframe cage]
Dam **** got deep in here last night between Dre and OMR? I dont know what the situation is now with the two of you but Dre if you need his help you should ride the bike to him rather than the other way around. When I need help from Mike I ride to his house but thats all gonna change now. When I need help from now on, Mike is coming here coz I said so Besides that Im keeping out of it.
well then ill wait and i will! Ill surprise roger.. but do you think i can ride up there with my CCT still in need of adjustment?
Tony makes it seem fine to ride like that
but you guys scare that **** outta me got me thinkin the bike is gonna bend rods or w.e. under me if i ride to much like that?
Last edited by bornreadybc; 06-20-2008 at 03:05 PM.
#7277
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: OMR SUBCAGE [subframe cage]
its true roger has done a lot, but i still done think he understands what i was asking.. w.e.
well then ill wait and i will! Ill surprise roger.. but do you think i can ride up there with my CCT still in need of adjustment?
Tony makes it seem fine to ride like that
but you guys scare that **** outta me got me thinkin the bike is gonna bend rods or w.e. under me if i ride to much like that?
well then ill wait and i will! Ill surprise roger.. but do you think i can ride up there with my CCT still in need of adjustment?
Tony makes it seem fine to ride like that
but you guys scare that **** outta me got me thinkin the bike is gonna bend rods or w.e. under me if i ride to much like that?
#7279
#7280
Registered User
Join Date: Jun 2007
Location: Im Lost. I have gone to look for myself, so if
Posts: 6,856
Re: OMR SUBCAGE [subframe cage]
I'm sure we could tell you where you fucked up if you weren't a baby and edited all your posts.
plus what the hell is family fued in the middle of an OMR uultimately business thread