What do you 929 owners use?
07-12-2004 | 07:16 AM
#2
Registered User
Joined: Mar 2003
Posts: 1,390
From: usa
Re: What do you 929 owners use?
I have a 954 and have had 5 different stabilizers. not judging or hating but these are my personal experiences...
Hyperpro- descent but started leaking after 1 month
Extremetech- ****** garbage, one stoppie and the thing popped off!!!!
Scotts- very good, easy to mount works great, but heard stories of failure
Daytona (cheapo) worked actually quite well, but weakened over time
Storz tank mount (current) BULLETPROOF, I love this thing SOOOO MUCH
If I had the cash, I would go for Ohlins- that is basically the best of the best.
Hyperpro- descent but started leaking after 1 month
Extremetech- ****** garbage, one stoppie and the thing popped off!!!!
Scotts- very good, easy to mount works great, but heard stories of failure
Daytona (cheapo) worked actually quite well, but weakened over time
Storz tank mount (current) BULLETPROOF, I love this thing SOOOO MUCH
If I had the cash, I would go for Ohlins- that is basically the best of the best.
07-12-2004 | 10:00 AM
#4
I Enjoy Posting At StuntLife!
Joined: Jun 2003
Posts: 1,852
From: Bang-em-Ville....Florida
Re: What do you 929 owners use?
i run Toby as well, the only down fall is if you break the bracket that connects from the stem nut a replacement is impossible to find. at least for me it is...
07-12-2004 | 10:02 AM
#5
back in the saddle again
Joined: Apr 2003
Posts: 7,322
From: terre haute, IN
Re: What do you 929 owners use?
hmm..are you talking about a windscreen brace or damper?
i'm running a toby and it works great. i had a scott's on there, which worked good but the mounting kit for scotts it garbage. it has little set screws that hold the main nut on, they are like 3mm and strip out really easily. I tightened my steering head back to spec every weekend and taking the scotts off to do that was a bioch and i eventually stripped those screws completely out and got the scotts stuck on my bike.
i'm running a toby and it works great. i had a scott's on there, which worked good but the mounting kit for scotts it garbage. it has little set screws that hold the main nut on, they are like 3mm and strip out really easily. I tightened my steering head back to spec every weekend and taking the scotts off to do that was a bioch and i eventually stripped those screws completely out and got the scotts stuck on my bike.
07-12-2004 | 11:00 AM
#6
I Enjoy Posting At StuntLife!
Joined: Jun 2003
Posts: 1,852
From: Bang-em-Ville....Florida
Re: What do you 929 owners use?
damer bracket, it goes under the stem nut and connects to the damper. i crashed and broke it. i cannot find a place that sells toby replacement parts.
07-15-2004 | 12:01 AM
#7
back in the saddle again
Joined: Apr 2003
Posts: 7,322
From: terre haute, IN
Re: What do you 929 owners use?
Originally Posted by StuntRagz Chris
damer bracket, it goes under the stem nut and connects to the damper. i crashed and broke it. i cannot find a place that sells toby replacement parts.
you can get a whole new mounting kit for it
07-15-2004 | 01:34 AM
#8
Group Moderator
Joined: Oct 2002
Posts: 1,062
From: everywhere
Re: What do you 929 owners use?
Binder..ur a retard 
I've never had a prob with the Scotts...It's been through a bit. I liked it but for endos I did'nt like the slight play it has in it.
I run a Sprint now. The bracket that goes on the stem is TOTAL garbage. The 1st time down it rotated 1/4 inch, but I fixed that. . The damper itself is very nice.
I've never had a prob with the Scotts...It's been through a bit. I liked it but for endos I did'nt like the slight play it has in it.
I run a Sprint now. The bracket that goes on the stem is TOTAL garbage. The 1st time down it rotated 1/4 inch, but I fixed that. . The damper itself is very nice.
Thread
Thread Starter
Forum
Replies
Last Post
