pocket bikes
07-10-2004, 03:09 AM
#1
Registered User
Thread Starter
Join Date: May 2004
Location: BAKERSFIELD,CA
Age: 50
Posts: 9
pocket bikes
i bought a pocket bike...its kinda fun!!wish it was faster!!!its not a real spendy one...i paid about 375$ for it.i got the trick air filter 4 it and the hi performance pipe.gave it alot more snap.but not alot more speed......anybody know any tricks to make that little bitch go faster 
07-10-2004, 02:00 PM
#3
Registered User
Join Date: Aug 2003
Location: East TN, more curves than Playboy
Age: 41
Posts: 495
Re: pocket bikes
i'm working on a bar and peg relocation on the same structure. haven't started yet, my **** is ghetto and busted a wheel and starter clutch.
got any spare parts?
got any spare parts?
07-10-2004, 03:51 PM
#5
Registered User
Join Date: Mar 2003
Location: usa
Age: 45
Posts: 1,390
Re: pocket bikes
yeah, on the cheapo pocket bikes they do in fact come with a govener (sp?) my buddy bought one and took it off and his bike does over 50 mph!! ash any bike mechanic and they'll tell you how to get it off. you'll be a happy camper. 
07-10-2004, 04:12 PM
#6
Registered User
Join Date: Apr 2003
Location: Toledo, Ohio
Age: 44
Posts: 1,811
Re: pocket bikes
check out www.pocketbikeplanet.com
in the cag forum cuz that's prolly what you got.
port and polish the carb, modify the reed block and take the packing out of the pipe and insert a 5 and a 1/4 inch piece of like alum broom handle for a straight pipe.
if you want we can modify our carb we have here, send you some pipe, and modify a reed block we have here, send us your stuff as a core. We'll modify the needle, and even send you a modified plug with the proper gap,
time and materials $100 including shipping
new carb $60
reed block $40
plug $5
we aren't raping anyone just trying to get people into the sport for a cheap but very effective cost.
we did the above mods on my buddies bike and one went from 25 mph to 33 mph, with a 165 lb rider
the other went from 24 mph to 32 but with a 225 lb rider.
the torque and throttle response is great, you'll notice it right off the bat.
if you want I can give you a detailed diagram on how to get your carb off and the reed block, all you need is well to make it easy take the rear wheel off, a phillips screw driver to remove the airbox or what ever you used to put it on, then you need a 4 mm allen wrench to get the carb off and for the reed block, since you'll be shipping the carb to me you'll have to plug your gas line in your bike to you don't lose the gas.for the reed block you'll need to have a fairly wide blade standard driver and carefully pop the reed block away from the block.
after you get all this back on the bike run 50:1 ratio synthetic oil with 93(or above)octane gas.
let us know
www.2bitrdrz.com
Ron & Josh
ohioranger4x4@aol.com
567-277-0280
in the cag forum cuz that's prolly what you got.
port and polish the carb, modify the reed block and take the packing out of the pipe and insert a 5 and a 1/4 inch piece of like alum broom handle for a straight pipe.
if you want we can modify our carb we have here, send you some pipe, and modify a reed block we have here, send us your stuff as a core. We'll modify the needle, and even send you a modified plug with the proper gap,
time and materials $100 including shipping
new carb $60
reed block $40
plug $5
we aren't raping anyone just trying to get people into the sport for a cheap but very effective cost.
we did the above mods on my buddies bike and one went from 25 mph to 33 mph, with a 165 lb rider
the other went from 24 mph to 32 but with a 225 lb rider.
the torque and throttle response is great, you'll notice it right off the bat.
if you want I can give you a detailed diagram on how to get your carb off and the reed block, all you need is well to make it easy take the rear wheel off, a phillips screw driver to remove the airbox or what ever you used to put it on, then you need a 4 mm allen wrench to get the carb off and for the reed block, since you'll be shipping the carb to me you'll have to plug your gas line in your bike to you don't lose the gas.for the reed block you'll need to have a fairly wide blade standard driver and carefully pop the reed block away from the block.
after you get all this back on the bike run 50:1 ratio synthetic oil with 93(or above)octane gas.
let us know
www.2bitrdrz.com
Ron & Josh
ohioranger4x4@aol.com
567-277-0280
07-10-2004, 08:22 PM
#8
Group Moderator
Join Date: May 2003
Location: PAINESVILLE OHIO on 1 wheel
Age: 47
Posts: 3,144
Re: pocket bikes
Originally Posted by gixxerguy6
check out www.pocketbikeplanet.com
in the cag forum cuz that's prolly what you got.
port and polish the carb, modify the reed block and take the packing out of the pipe and insert a 5 and a 1/4 inch piece of like alum broom handle for a straight pipe.
if you want we can modify our carb we have here, send you some pipe, and modify a reed block we have here, send us your stuff as a core. We'll modify the needle, and even send you a modified plug with the proper gap,
time and materials $100 including shipping
new carb $60
reed block $40
plug $5
we aren't raping anyone just trying to get people into the sport for a cheap but very effective cost.
we did the above mods on my buddies bike and one went from 25 mph to 33 mph, with a 165 lb rider
the other went from 24 mph to 32 but with a 225 lb rider.
the torque and throttle response is great, you'll notice it right off the bat.
if you want I can give you a detailed diagram on how to get your carb off and the reed block, all you need is well to make it easy take the rear wheel off, a phillips screw driver to remove the airbox or what ever you used to put it on, then you need a 4 mm allen wrench to get the carb off and for the reed block, since you'll be shipping the carb to me you'll have to plug your gas line in your bike to you don't lose the gas.for the reed block you'll need to have a fairly wide blade standard driver and carefully pop the reed block away from the block.
after you get all this back on the bike run 50:1 ratio synthetic oil with 93(or above)octane gas.
let us know
www.2bitrdrz.com
Ron & Josh
ohioranger4x4@aol.com
567-277-0280
in the cag forum cuz that's prolly what you got.
port and polish the carb, modify the reed block and take the packing out of the pipe and insert a 5 and a 1/4 inch piece of like alum broom handle for a straight pipe.
if you want we can modify our carb we have here, send you some pipe, and modify a reed block we have here, send us your stuff as a core. We'll modify the needle, and even send you a modified plug with the proper gap,
time and materials $100 including shipping
new carb $60
reed block $40
plug $5
we aren't raping anyone just trying to get people into the sport for a cheap but very effective cost.
we did the above mods on my buddies bike and one went from 25 mph to 33 mph, with a 165 lb rider
the other went from 24 mph to 32 but with a 225 lb rider.
the torque and throttle response is great, you'll notice it right off the bat.
if you want I can give you a detailed diagram on how to get your carb off and the reed block, all you need is well to make it easy take the rear wheel off, a phillips screw driver to remove the airbox or what ever you used to put it on, then you need a 4 mm allen wrench to get the carb off and for the reed block, since you'll be shipping the carb to me you'll have to plug your gas line in your bike to you don't lose the gas.for the reed block you'll need to have a fairly wide blade standard driver and carefully pop the reed block away from the block.
after you get all this back on the bike run 50:1 ratio synthetic oil with 93(or above)octane gas.
let us know
www.2bitrdrz.com
Ron & Josh
ohioranger4x4@aol.com
567-277-0280
http://cgi.ebay.com/ws/eBayISAPI.dll...K:MEWA:IT&rd=1
would the engine be the same ?
and what part of the forums should i be reading ?
07-10-2004, 09:45 PM
#10
Registered User
Join Date: Apr 2003
Location: Toledo, Ohio
Age: 44
Posts: 1,811
Re: pocket bikes
Originally Posted by MANUBI33
heres the one i bought....
http://cgi.ebay.com/ws/eBayISAPI.dll...K:MEWA:IT&rd=1
would the engine be the same ?
and what part of the forums should i be reading ?
http://cgi.ebay.com/ws/eBayISAPI.dll...K:MEWA:IT&rd=1
would the engine be the same ?
and what part of the forums should i be reading ?
here is the forum you need
POCKETBIKE PLANET- CAGLLARI/DAYTONA FORUM
LET ME KNOW IF YOU WANT THE PERFORMANCE PARTS
RON
07-15-2004, 05:12 AM
#11
Registered User
Join Date: Dec 2002
Location: Mesa, Az
Age: 42
Posts: 2,126
Re: pocket bikes
They have some pimp-*** little pocket bikes on e-bay. They have a little 49cc 50 mph (claimed) bike right now with 3 days left, and it's at 10.00 dollars. Hmmm....a little stunt toy I might have to get myself here...
Not the ten dollar one though, for some reason I don't trust it.
Not the ten dollar one though, for some reason I don't trust it.
Thread
Thread Starter
Forum
Replies
Last Post
shugga
Stunt Bike Videos and Reviews
87
01-15-2006 12:09 AM
