for my dirt bike bars that im tryin out.

Gene

 

Try a car performance shop. You will need to make the needs though.

 

.....any steel braided lines should be long enough.

 

Part Unlimited
you can order as long as you want
and as short as 2 inches(which i bought cause thats the only thing i could find to replace my tube that goes from my front master cylinder to the resovior.)

 

www.jegs.com
you can order a 25 ft. roll and make your own. it's pretty easy.

 

There was a place right near Orlando called Speedworks or something like that. I went there with Merk when I was down. They had all sorts of them in stock. Send Merk a pm, he'll know.

 

screw all that custom stuff. parts unlimited makes universal SS lines. you buy the banjo's you want and they have threaded lines that go into the banjo's. once you have the banjo's, you pick the length of SS line you want and bam, good as gold.

like 14-15$ for a line and somewhere around 2-4$ per banjo. not very expensive at all. measure the distance from the caliper to the master cylinder then add like 3-4 inches to that.

 

i got mine at parts unlimited. on my 929 30 inches on the right side and 32 inches on the left side worked out fine.