rkham11

I tried searching, and couldn't come up with anything.

I want to have a rear hand brake. I see some that control the stock calliper, is it worth buying one of these? also, will I need a different clutch lever or will I need to cut mine down. And one more question. I would like to keep the bike street legal, is it possible to have a clutch and brake lever on the left clip on and still have my blinker/horn/hibeam controls??

KpeckR6

I bought 0 degree clipons that are longer and straighter. Dual caliper setups are a little more expensive but you use a 4piston caliper for the hand. The banjo bolt running off you factory rear mastercylinder only utilizes 60-90%(depending on the kit) of your braking power for hand brake. Dual is over 100%. Probably need an ez pull clutch system also because you're only going to use one finger on the clutch. Trim clutch handle about inch and a half from where the indent starts for your pointer finger.

WHEELIE

I would Deff. Invest in one of these...
https://www.stuntlife.com/forums/464...-clutch-6.html

I have a FTI junction Master if you want too run a HB (Just have to
buy a line and a HB lever set up)

rkham11

What's an FTI Junstion Master??
And Bro! those clutches are killer I'm about to order one.
You think I'll be able to cram a clutch, HB, and them light controls on a zero degree clip-on??

WHEELIE

It's a Junction valve that you can run a HB along
with your Foot Brake to your stock rear Caliper...





Tell Josh at RSC WHEELIE sent ya.. and I'm sure
you should be able to fit all that on them clip ons...

bebef4i

I got a 05 r1 brembo front master cyliner with every thing bottle line tap on and moose clutch perch new never opened all you will need is a moose Shorty lever 150 hit me up if interested

rkham11

by bottle you're talking about a reservoir? And by line tap are you talking about a junction valve for the rear master? I don't know much about these brake setups that use the standard rear brake

rkham11

So to be clear, if i want to run a HB to the stock rear caliper, I need a master cylinder up front that connects to a special rear master? Sorry about all the questions but I can't find any good information on this

WHEELIE

You need a brake master just like the one you have for your
front brakes. then Run a line to that master and then out of
it to the rear caliper. then your Foot brake and HB run off the
same master..

KpeckR6

It says the 636 and 03-09 r6 is the same rear cylinder. That's great. My hand brake set up right now is a 02 rear cylinder with a banjo kit with a hose clamp and large nut. When I pull in my front master, the hack system moves around. Kinda works. I was going to buy a dual bracket and line for $250+caliper$50(eBay). This seems way more efficient and cheaper. I'll have to see how much just a rear cylinder is.

rkham11

Loook at FTI super-duty single caliper handbrake adapter.

rkham11

And I might be able to sell you one brand new for way cheap. Not sure though cause the part is in Houston and I"m in dallas but I might be able to have someone else ship for me

zeus_r6

If you decide on a new dual caliper bracket and master hit me up

rkham11

I was planning on hitting you up for a hohey bracket, but it might be a while I need a bunch of other stuff first..Do you sell Sick Innovations stuff?

PS I've ordered from you before through SR, good communication and fast shipping

zeus_r6

We do sell a ton of HoHey stuff and quick shipment on it as well At this time, no on sick innovations. Maybe down the road we'll look into it

Thanks for the kind words as well sir!