Magura Master over brembo, best mm
#42
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
#44
Re: Magura Master over brembo, best mm
#45
Re: Magura Master over brembo, best mm
There is always the Brembo 16RCS Clutch master so you can switch the pivot point between 16 and 18. You can have either a 16x16 or 16x18. Abit more then the 16x18 though. Lever is folding to so you won't break as many
See them here.
http://moto-madness.com/catalog/inde...roducts_id=867
See them here.
http://moto-madness.com/catalog/inde...roducts_id=867
Last edited by moto-madness.co; 02-09-2010 at 09:45 AM.
#46
Re: Magura Master over brembo, best mm
well just got the hhd big rotor kit and running two 4 piston calibers. if i get brake lag ill sell my entire bike for 20 bucks shipped lol
#47
Re: Magura Master over brembo, best mm
so the smaller the mm's are make it easier to lock up the back tire?????? i got a 4 piston caliper with a stock rotor and a nissin master off a gixxer '05 or something and it works like ****, giving me a mean handbrake finger blister..
#48
Re: Magura Master over brembo, best mm
only when she is being dirty plus the young buck in the group has got me faded in a bad way so im trying to step up the game. And its reeking havoc on the rotor
#49
Re: Magura Master over brembo, best mm
hey omr, i got a dual caliper on my 636, stock footbrake(garbage), and a front right nissin 4pot. I link em up, i wanna get rid of the stock caliper. Have u had any experience with the busa 2pot or the little brembo 2pots? I wanna switch it for one of those, just not sure which one. The brembo is nice and small so i wont have any problems fitin it in there, just havent seen too many people run em.
#50
Re: Magura Master over brembo, best mm
ya i have the same setup and it is hard as **** and hella sucks. its usable but **** it wears me out. my buddy had same setup and he said brembo 16x18 all the way. another one of my buddies has a 636 radial and it is nice and soft and easy pull and locks up with one finger. anyone know what bore stock 636 radial is?
#51
Re: Magura Master over brembo, best mm
ya i have the same setup and it is hard as **** and hella sucks. its usable but **** it wears me out. my buddy had same setup and he said brembo 16x18 all the way. another one of my buddies has a 636 radial and it is nice and soft and easy pull and locks up with one finger. anyone know what bore stock 636 radial is?
#52
Re: Magura Master over brembo, best mm
I just picked up a 13mm Magura Billett Clutchside last week:
I'm pushing a 4 piston caliper on my dual caliper setup, and used to have an 04 R1 master and they are completely apples and oranges.
Installing the Magura, I bled from both nipples on the master, caliper, and the banjo on the master, and for some reason, when i pull on the lever standing still in the garage, it gets tight but pulls all the way in until it hits the stop. I'm not sure if thats normal or not but its kinda weird.
I'm pushing a 4 piston caliper on my dual caliper setup, and used to have an 04 R1 master and they are completely apples and oranges.
Installing the Magura, I bled from both nipples on the master, caliper, and the banjo on the master, and for some reason, when i pull on the lever standing still in the garage, it gets tight but pulls all the way in until it hits the stop. I'm not sure if thats normal or not but its kinda weird.
#53
Re: Magura Master over brembo, best mm
i dont think a 13mm piston will be enuff to push a 4piston to the limits. Sure it will work great for most needs, but when u come in fast for a stall, it takes MUCH more power, and i think u will run out of lever travel. Its not a matter of LEVERAGE its just the travel of the lever to displace enuff with only a 13mm piston...
Thread
Thread Starter
Forum
Replies
Last Post