Im puttin new throttle cables on my 08 rr and need to get the airbox off to get to the throttle bodies. Anybody know a easy way to get it all off. Figured id ask before i start takin **** off i dont need to. Ive already got the tank lifted and the steerin stab off

 

loosen bolts and take it off

 

http://www.600rr.net/vb/showthread.p...t=hrc+throttle

FYI when you get to actually putting the cables in the throttle bodies, it was easier for me to just loosen the collars on the boots of the TB's (you will need a long *** phillps screwdriver for this), pull the TB's out, put the cables in and then reset the TB's and tighten up the collars. That way you don't have to **** around with the limited space or have special needle nose pliers and ****.

 

This is the only way to go! I screwed around with trying to wrap the cables around with the throttle bodies in place and wasted HOURS. Just do what he said and pull off the throttle bodies...it'll make this job much, much easier.

- BigJason

 

ha alright thanks