Front suspension problems
#21
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: Front suspension problems
one question since you said your technique was on point , is the bike possibly choppered out ? i have seen stunt bikes with alot of rake from people slamming them down a million times and that would definitely make the tire more likely to skid ..
#22
Re: Front suspension problems
I've never heard of this happening. Wouldnt there be noticeable play in the neck then?
#23
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
#25
Re: Front suspension problems
dialing out the sag just means tighten the rear spring till there is no sag in the suspension , the suspension will be at the top of it's travel with no one on the bike ..
as for the bounce when you are doing seat standers just set the rear shock settings [compression and rebound ] at full hard , i think you will like your bike alot better after doing this
as far as the preload on the front goes i like mine as tight as i can get it with out effecting the rebound meaning i set it so the bike doesnt pogo on the pick up , i think im at about 50% if memory serves
as for the bounce when you are doing seat standers just set the rear shock settings [compression and rebound ] at full hard , i think you will like your bike alot better after doing this
as far as the preload on the front goes i like mine as tight as i can get it with out effecting the rebound meaning i set it so the bike doesnt pogo on the pick up , i think im at about 50% if memory serves
cool, can you look at your pre load settings and tell me how many lines are showing? and it was never a stunt bike before me and i highly doubt the douche i bought it from was out rocking wheelies on it. i appreciate the tip on the rear settings. im a little guy but when it comes to my stoppies i am pretty aggressive, and with this sliding going on ive about ate it hard! i have no problem 75-85mph driving the forks to the pavement and locking up the front straight to bp, but when it wants to wash out right off the get go, imma get real tired of re-upolstering my seat due to my *** sucking the vinal right off the seat. . im just thinking the guy who had it before me tried to adjust it his self and screwed everything out of wack.
#28
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: Front suspension problems
cool, can you look at your pre load settings and tell me how many lines are showing? and it was never a stunt bike before me and i highly doubt the douche i bought it from was out rocking wheelies on it. i appreciate the tip on the rear settings. im a little guy but when it comes to my stoppies i am pretty aggressive, and with this sliding going on ive about ate it hard! i have no problem 75-85mph driving the forks to the pavement and locking up the front straight to bp, but when it wants to wash out right off the get go, imma get real tired of re-upolstering my seat due to my *** sucking the vinal right off the seat. . im just thinking the guy who had it before me tried to adjust it his self and screwed everything out of wack.
what you want to do is set it as tight as you can with out it causing the bike to pogo right in the begining of your stoppie but keep in mind the tighter you get it the more likely you are of skidding the tire if your not on point with your initial pick up ..
#29
Re: Front suspension problems
i have 5 lines showing but me telling you what my preload setting is is a waste becuase the setting depends on how aggresive your approach is , wieght , pick up technique , how quick you transfer from throttle to brake ,how soon you get to balance point how good you are at getting the wieght transfered to the front tire and a few other things i cant think if right now lol ..
what you want to do is set it as tight as you can with out it causing the bike to pogo right in the begining of your stoppie but keep in mind the tighter you get it the more likely you are of skidding the tire if your not on point with your initial pick up ..
what you want to do is set it as tight as you can with out it causing the bike to pogo right in the begining of your stoppie but keep in mind the tighter you get it the more likely you are of skidding the tire if your not on point with your initial pick up ..
#30
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: Front suspension problems
two lines showing is very tight and would almost definitely make the bike pogo and more likely to skid the tire ...
are you taking advantage of the weight transfer that happens when you go from accelerating to braking or are you getting off the gas and letting the bike roll some before hitting the front brake ?
when you are on the gas hard the front of the bike is wanting to lift and as soon as you get off the throttle the front dives at that exact moment you should be starting your lift if not you are not taking advantage of the weight transfer
are you taking advantage of the weight transfer that happens when you go from accelerating to braking or are you getting off the gas and letting the bike roll some before hitting the front brake ?
when you are on the gas hard the front of the bike is wanting to lift and as soon as you get off the throttle the front dives at that exact moment you should be starting your lift if not you are not taking advantage of the weight transfer
#31
Re: Front suspension problems
DUDE YOU SHOULD GO TO WWW.RACETECH.COM AND FIGURE OUT THE RIGHT SPRING RATE AND OIL LEVEL FOR YOU. ITS A GOOD SITE TO HELP GET YOUR **** DIALED IN. MAYBE SLOW DOWN YOUR REBOUND AND LIFT YOUR FRON END A LIL TO GET MORE TRAIL. I DID IT ON MY R6 THAT HAS 06 636 FORKS AND IT HELPED ME A TON
#32
Re: Front suspension problems
two lines showing is very tight and would almost definitely make the bike pogo and more likely to skid the tire ...
are you taking advantage of the weight transfer that happens when you go from accelerating to braking or are you getting off the gas and letting the bike roll some before hitting the front brake ?
when you are on the gas hard the front of the bike is wanting to lift and as soon as you get off the throttle the front dives at that exact moment you should be starting your lift if not you are not taking advantage of the weight transfer
are you taking advantage of the weight transfer that happens when you go from accelerating to braking or are you getting off the gas and letting the bike roll some before hitting the front brake ?
when you are on the gas hard the front of the bike is wanting to lift and as soon as you get off the throttle the front dives at that exact moment you should be starting your lift if not you are not taking advantage of the weight transfer
well i think we figured it out, but not 100%. i dont feel like such a dumb *** now but we think its just the tires. 3 other ppl out at the lot were having the same issue. all of us bought pilot powers from cycle gear in the last month. were thinking they just might be a bad batch of tires or cycle gear has a rep for buying ALOT of tires at one time and we may just be getting really old tires.
i use full advantage of the drop from letting off the throttle. i had 2 other ppl ride my bike and did the same to them. suspension is right on the money. after we all kind of figured out that we all bought the same tire from the same place.... its a though? one of the other rider have ran powers forever and never had a problem til now. ive litterally gone over every suspension set up at least 4 times now.
Thread
Thread Starter
Forum
Replies
Last Post