Do you need to drill a hole in the side fairings of the 04 636 for the bottom mount on the new sick cages?
If so could anyone show me a pic and or measure where the hole has to be located so I can make the holes... I am still waiting on the cage but the bike will be getting painted before I get the cage most likely...

 

You have to drill holes for the bottom, your just going to have to line it up when you get your cage.

 

theres plenty of pics in the 636 pics section that show where you need to put the hole but youll prolly wanna wait to paint it till you drill cuz it might chip.

 

Wait till you get the cage to cut the holes in the plastics cuz your prolly not gonna get it right by going off someone elses

 

tks guys.... well if anyone could get me some measurements that would be awesome! and maybe a close up pic.

 

anyone?

 

I can take pics and send them ,like tommorow night man. I used a sawzall on my plastics for the lower part of the cage...it came out kinda shitty..I realized after that I didnt have to cut as much as I did....Oh well. They are only plastics.

 

https://www.stuntlife.com/forums/281...636s-here.html

id prolly just use a hole saw but ive never done it so....

 

Does anyone know if the bottom mount location has changed on the sick cage since they redesigned the cage for the 04 636???

 

I think all that was redesigned was how it bolts together not the style of cage. one side of cage has threads in it to connect instead of using a long bolt and a nut.

 

I have had both and they use the same holes

 

This is the easy way to get the holes cut perfect.

1. Put the bike on a rear stand.
2. Pull you side fairings.
3. Bolt up your cage.
4. Use a laser level or pointer and get it lined up with the cage bolt.
5. Pull the cage off.
6. Put the side fairings back on.
7. The laser marks where you need to drill your holes.
8. Use a hole saw and drill the proper size hole for your cage.
9. Put everything back together.