New 0 Degree Clip-Ons with Risers!!!
#1
New 0 Degree Clip-Ons with Risers!!!
I've been getting alot of PM's and interest in these new clip-ons so I thought it would be good to create a thread for them.
I posted about them awhile back on the Stuntride forum and I actually have a Group Buy going on there that was supposed to end today. I am going to extend that deadline for one week for any SL members that may want to join it.
Here's the details on them:
-Billet Aluminum Construction
-Two piece clamps are easy to install/remove
-Each piece is 100% replaceable
-Can sample different rise heights easily (change of heights can be done in 15 minutes at the lot with basic tools)
-Heavy thickness handlebars won't bend like Vortex and Freestyle Ingenuity bars
-Can run them below the triple while still getting rise for better "stunt feel" that most guys seem to prefer. You don't have to run the HoHey Upper Triple to run your clip-on bars at a rised height and you don't have to lower the forks to run them on top of a stock triple(No More Bottoming Out On Your Fender!)
-Available in 36mm-54mm clamp sizes so they should fit nearly anything
-Risers are interchangeable with any size clamp
These are definitely an upgrade of the Vortex bars since they offer 0 degree options and can be mounted below the triple with a variety of rise height options. For that reason also they are better than the Freestyle Ingenuity 0 degree ones since you can adjust their height.
I will be writing a product review article on these for an upcoming issue of Stuntride Magazine that will showcase 2 professional riders testing them out along with their feedback so watch for that too.
These sets are available with 0", .5", 1.5", 2.5", and 3.5" rise heights and they come anodized in Silver, Black, or Red colors. Red adds a few days to lead-times since they aren't stocked.
PM me if you have any questions. Current MSRP is $140 plus shipping and will be going up to $155 plus shipping as of May 1st according to the manufacturer. I can get better deals on them for you guys. See the Group Buy in the Group Buy section on Stuntride.com forums for the best price.
I posted about them awhile back on the Stuntride forum and I actually have a Group Buy going on there that was supposed to end today. I am going to extend that deadline for one week for any SL members that may want to join it.
Here's the details on them:
-Billet Aluminum Construction
-Two piece clamps are easy to install/remove
-Each piece is 100% replaceable
-Can sample different rise heights easily (change of heights can be done in 15 minutes at the lot with basic tools)
-Heavy thickness handlebars won't bend like Vortex and Freestyle Ingenuity bars
-Can run them below the triple while still getting rise for better "stunt feel" that most guys seem to prefer. You don't have to run the HoHey Upper Triple to run your clip-on bars at a rised height and you don't have to lower the forks to run them on top of a stock triple(No More Bottoming Out On Your Fender!)
-Available in 36mm-54mm clamp sizes so they should fit nearly anything
-Risers are interchangeable with any size clamp
These are definitely an upgrade of the Vortex bars since they offer 0 degree options and can be mounted below the triple with a variety of rise height options. For that reason also they are better than the Freestyle Ingenuity 0 degree ones since you can adjust their height.
I will be writing a product review article on these for an upcoming issue of Stuntride Magazine that will showcase 2 professional riders testing them out along with their feedback so watch for that too.
These sets are available with 0", .5", 1.5", 2.5", and 3.5" rise heights and they come anodized in Silver, Black, or Red colors. Red adds a few days to lead-times since they aren't stocked.
PM me if you have any questions. Current MSRP is $140 plus shipping and will be going up to $155 plus shipping as of May 1st according to the manufacturer. I can get better deals on them for you guys. See the Group Buy in the Group Buy section on Stuntride.com forums for the best price.
#3
Re: New 0 Degree Clip-Ons with Risers!!!
I saw on stuntride - 0 degree but if you go with the bar w/o the rise you could get 5 degree.
http://www.stuntride.com/vbstunt/showthread.php?t=4476
http://www.stuntride.com/vbstunt/showthread.php?t=4476
#4
Re: New 0 Degree Clip-Ons with Risers!!!
The ones posted here are 0 Degree ones; You can also get 5 Degree ones.
Close; You can get the risers with the 5 Degree bars too; So basically you can go with either 0 Degree or 5 Degree setups depending upon preference. It's all in the riser themself since that is where the angle is machined.
I saw on stuntride - 0 degree but if you go with the bar w/o the rise you could get 5 degree.
http://www.stuntride.com/vbstunt/showthread.php?t=4476
http://www.stuntride.com/vbstunt/showthread.php?t=4476
#6
Re: New 0 Degree Clip-Ons with Risers!!!
damn i was hunting these out for a while, still might swoop a pair buttttttt, if u google swatt clip ons some sv forum has them for129.00 shipped if your a member....
and its not that hard to join some gay sv forum and post some **** to get some cheap ****.
help us support you!! get a deal like 129.00 shipped and ill get a 50mm 2.5 5degree and a 48mm 2.5 5 degree
DO IT!!!
and its not that hard to join some gay sv forum and post some **** to get some cheap ****.
help us support you!! get a deal like 129.00 shipped and ill get a 50mm 2.5 5degree and a 48mm 2.5 5 degree
DO IT!!!
#8
Re: New 0 Degree Clip-Ons with Risers!!!
http://stuntride.com/vbstunt/showthread.php?t=4476
yeaaaaaa this is wut im talking about good ****, i want a 50mm right now, holler
paypal ready
yeaaaaaa this is wut im talking about good ****, i want a 50mm right now, holler
paypal ready
#10
Re: New 0 Degree Clip-Ons with Risers!!!
damn i was hunting these out for a while, still might swoop a pair buttttttt, if u google swatt clip ons some sv forum has them for129.00 shipped if your a member....
and its not that hard to join some gay sv forum and post some **** to get some cheap ****.
help us support you!! get a deal like 129.00 shipped and ill get a 50mm 2.5 5degree and a 48mm 2.5 5 degree
DO IT!!!
and its not that hard to join some gay sv forum and post some **** to get some cheap ****.
help us support you!! get a deal like 129.00 shipped and ill get a 50mm 2.5 5degree and a 48mm 2.5 5 degree
DO IT!!!
http://stuntride.com/vbstunt/showthread.php?t=4476
yeaaaaaa this is wut im talking about good ****, i want a 50mm right now, holler
paypal ready
yeaaaaaa this is wut im talking about good ****, i want a 50mm right now, holler
paypal ready
#11
Re: New 0 Degree Clip-Ons with Risers!!!
He is running their 5 Degree ones; I don't think he could wait for the 0 Degree ones since he had a busy schedule. To my knowledge he likes them, but he has just been too busy to post about them.
#12
Re: New 0 Degree Clip-Ons with Risers!!!
pm sent get em here quiiick!!
im thinkin the 5 degree swapped is gunna be for me! I currently rock 636 stockers switched and flipped under the tripple (F4i w/1krr front end)
i love it and hate it, so cant wait to try these. if they are baller status and cooler than the Thorpes(if they ever come out lol) ill throw a set on my new 600rr im building
im thinkin the 5 degree swapped is gunna be for me! I currently rock 636 stockers switched and flipped under the tripple (F4i w/1krr front end)
i love it and hate it, so cant wait to try these. if they are baller status and cooler than the Thorpes(if they ever come out lol) ill throw a set on my new 600rr im building
#13
Re: New 0 Degree Clip-Ons with Risers!!!
pm sent get em here quiiick!!
im thinkin the 5 degree swapped is gunna be for me! I currently rock 636 stockers switched and flipped under the tripple (F4i w/1krr front end)
i love it and hate it, so cant wait to try these. if they are baller status and cooler than the Thorpes(if they ever come out lol) ill throw a set on my new 600rr im building
im thinkin the 5 degree swapped is gunna be for me! I currently rock 636 stockers switched and flipped under the tripple (F4i w/1krr front end)
i love it and hate it, so cant wait to try these. if they are baller status and cooler than the Thorpes(if they ever come out lol) ill throw a set on my new 600rr im building
#15
Re: New 0 Degree Clip-Ons with Risers!!!
You can still run these with a HoHey triple; You would just run a lower rise; In my opinion these are better than the FI 0 Degree ones too because the handlebars these come with are thicker and stronger than the FI ones. I've seen so many FI ones bend and I don't forsee that being an issue with these ones.
#17
#18
#20
Re: New 0 Degree Clip-Ons with Risers!!!
No; To my knowledge I am the only one selling the 0 Degree ones. HoHey is not selling them, but I sell HoHey and I am running a Group Buy starting Sunday on Stuntride.com so if someone is interested they could purchase these clip-ons and also purchase a HoHey upper triple.