EndlessMoto

I will double check, but you should have received a response. All of the first batch orders have been delivered and Swatt was waiting on them to come back from anodizing as of last week.

I don't have any pics yet, but if they are like the 600RR they will need a spacer which Swatt will be making for applications that require it.

Unfortunately the Group Buy is over and Swatt just raised the prices as of May 1st; I can still get SL members a small discount over our website price so PM me if you want a set. Right now we are looking at about 2-3 weeks for orders to arrive to your door since Swatt is having problems keeping up with the high demand.

boozy4

https://www.stuntlife.com/forums/464...ml#post3948800
pm me back if you can help me or just send me my stuff!!!!

evilsydeeggot

is production up to date and in stock now? interested in ordering a set

SliverR6

Unfortantyly NO. I've been waiting 3 weeks for my second set and 6 weeks for a replacement. Endless Performance has great service if you decide to buy, but be prepared to wait.

EndlessMoto

Unfortunately SilverR6 is correct; We placed an order for an additional 10 sets, but those sold before we have even received them. We are trying to have Swatt make extras with every order so we can stock them, but demand has been too high for what they have kept up with. Hopefully in the next 1 or 2 shipments we will be able to accumulate some stocking sets. Right now we are looking at 3-4 weeks on orders since their outsourced anodizing has been getting slower and slower.

Thanks for the kind words and your patience. We really wish people didn't have to wait more than 1-2 weeks on these.

f4ibry

Aj I emailed you

inolen

https://www.stuntlife.com/forums/464...-bars-1-a.html

f4ibry

I just want mine woodcrafts r killen me

havok

ok i got mine and they are not grooved...sooo, i have mine on..put them on...and if you pull up or push down the bracket moves,,,im not sure if i trust these,,,one hard stall and i feel like the bolts are going to snap...or being in a stoppie and the thing snaps...

vegasrider2005

ya mine aint grooved either and the bolts that hold the riser to the clamp are too short so it ended up striping out the clamp a bit, i took really long allen bolts sent them all the way threw and ground them down flush. they are as solid as a rock now but stock they suck

havok

hmmmmm ill see what i can do...

EndlessMoto

That's normal that they have a little play; I've had a few guys email me about this and the set on our 636 stuntbike are like this too. So far ours has taken some hard hits and Ryan S and Joey B have been running these for a few months now under hard stoppies and drops with no problems. I'd be curious to see a pic of what you did though vegasrider2005 because that sounds like a nice setup.

havok

hmmmmmm

inolen

Before I placed my order I brought up the issue that they may be weak. I was told there were grooves to help hold the riser in addition to the bolts, but there doesn't appear to be any. Also you said you jumped and applied a **** load of force and nothing budged, but now you're saying they are known to move around.

This is pretty whack

vegasrider2005

this is the bolt size i used (the rusty one). the clamps are not really threaded all the way threw so i just forced the bolt threw (turns really hard) but its not coming lose. it sticks out the back about a quarter inch so i took a grinder ground it down flush. dont have my bike here with me now but when i get home ill take more pics of the clipon it self [IMG][/IMG]

EndlessMoto

There are at least 30 sets of these out there now and not one has had any breakage issues. We have jumped on these and they have not showed any threats of breaking and that includes some hige leverage stoppies and very hard drops.

Joezx10r

What is the bolt size?

vegasrider2005

the thread size is the same, not sure on the length but ill measure it when i get home tonight

Dean Ellis

looks like its 10mm longer. just bring it to the hardware store and get the next size up.

Joezx10r

Sorry I was wondering what the bolt diameter is 10mm 8mm or something standard like a 3/8-16 ? Somebody was asking about the strength of the bolts since there was no groove on the clipons like they thought there would be. The bolts are meant to have the pressure in tension not shear which could happen without a groove and slot joint. Like this or dowel pins or dove tail joint.