Help!!!! My bike wont start.....
#1
Help!!!! My bike wont start.....
Ok so i bought a bike a few weeks back and it was missing some engine bolts/mounts etc. Well the night i got it i stripped it down completely and now i have itback together and i can't get them damn thing to start. It turns over it just wont fire. I just pulled the plugs and they seem fine. Might jut go ahead and replace them and im going to check the coil. But if anyone has any advice or help in anyway i would be much apprectitive. I jonesin over here. Oh yeah itsa 600rr.
Last edited by wannastunt21; 03-01-2009 at 07:08 PM.
#6
Re: Help!!!! My bike wont start.....
also make sure you hear the fuel pump kick on when you turn the ignition on.
i would also drain the gas and put new fuel in it too. you have no idea how old the gas was thats in it..
i would also drain the gas and put new fuel in it too. you have no idea how old the gas was thats in it..
#9
#10
Re: Help!!!! My bike wont start.....
#14
Re: Help!!!! My bike wont start.....
maybe you didn't hook something up right when you put it back together. make sure everything is connected right. Are the gauges on the bike? Not sure where the tip over sensor is on 600RR's but on 1000RR's they are on the gauges/upper/ somewhere and wont start unless they are in place...
#16
#17
Re: Help!!!! My bike wont start.....
yeah gauges are hooked up, and from what i can see everything is connected... but i might be overlookin somethin... anybody recommend a shop around daytona?
#20
Re: Help!!!! My bike wont start.....
this might not be it but did you remove disconnect or lay over the tilt sensor? i took my bike apart forgot to put it back in the right position an my **** was dead for hrs till i realized what i did lol an if we're not near it we're all jus shootin in the dark wit suggestions. gotta be power(battery) signal(wires) or tilt sensor lol oh its got gas right?