Just curious which front brake master guys are using for doing stoppies. I have heard guys swap the stock ones out for like a 00-01 CBR929 master because it has a bigger piston and takes more force to pull which helps it to not be to touchy.

I put a 929 master on my 636 last year and it made it actually hard to get it to lift. Been thinking about going to a 954 master because the piston is just slightly smaller.

Anyone run Brembo 19X20s? Is it worth it

Post up what ya got if you do a lot of stoppies.

 

the master doesnt matter, you must have it on setting #5 for good stoppies!

 

im running a gsxr radial on my 954 frontend and its pimp..im good for 4-500 ft... the feel is perfect... any master will do fine. stoppies are all about body english and brake play..i use my body to get the bike up to BP then feather the lever to keep me in the groove..braided lines help alot more than a different master

 

That's some funny **** Some people must not have seen it.

 

I run braided lines on both of my bikes also but just curious on what guys are running and since i have 2 different bikes i'm trying to get them setup similar so they feel and ride as close as possible. the master plays a much bigger role than braided lines do IMO. braided lines don't really change much of the feel, slightly i guess but not as much as some think.

 

i agree braided lines just keep the feel consistent compared to rubber lines ..

the master is going to set the feel of the system , i like a hard feel so i run a 954 master [on setting 5 ] but some like a softer feel and run like a gsxr radial master or a brembo

 

check out the craigslist stunter video - setting #5 is where its at ut ughhh

 

 

the 954 is just a little smaller piston than a 929 isn't it? i think the 929 is almost too stiff.

I have no idea what size piston is in the stock 07600rr front master.

 

that ***** was ****** funny

ohh

and you gotta use both brakes to do a rollin burn out

 

you guys are all wrong only one of you is right.

setting# 5 is the ticket
I heard there is a guy on craigslist that can teach you how lol

 

brembo 19x18 all day

 

I prefer the rock hard 19x20, but it depends what you like most people like the 19x18 feel

 

i like the 1000RR master... setting #5 of course

 

i figured 19x20 may be a bit to stiff but didn't know you could even get a 19x18.

my buddy has a 1000rr master on his f4i and the thing is super touchy.

 

Just squeeze the damn thing harder... it'll pick up eventually

 

come on what do some of you big dogs out there run for a front master

 

i swapped my hydraulic system out for a cable drum system. the difference is ******* amazing

 

A certain master isnt gonna make you a pro at stoppies, even if pros use em. I know a guy running an f4i master that is rolling 400+

 

those master actually have pretty good feel