greyghost300c

ive been lookin up ramps online and cant decide what to get
ill be riding by myself most of the time. and want an easy set of ramps (angle)

when i load my f4i now i put a piece of plywood on my front porch steps roll the bike into my living room then back my truck up to the steps and use the plywood from the porch to the truck. its a pain in the *** the piece of plywood is only 3' x 4 '

what do you use?!?!

PICS would be nice

J150

no pics right now but go to pep boys for cheap they have a bunch of loading ramps

frayz

i use a ramp from pepboys. put the bike in gear, and stand next to it, drive it up into the back of my truck and step up into it as the bike rolls up in there. GRAVY

greyghost300c

is your truck lowered or the ramps long?

faceless

+1 thats how i do it. i got ramps that fold up so i can load them up easier.

OnEWhEeLNEAL

I bought these off ebay. I keep the bike in gear and walk up the one ramp quick while using the other ramp to get the bike up. Im eventually gonna ride up the one ramp but the first day I tried I busted my *** and almost got crushed by my bike So thats been on hold for a minute haha.

http://cgi.ebay.com/ebaymotors/ws/eB...%3AIT&viewitem=

greyghost300c

what kind are these? price?


I like both of those.. im a little short so i cant use these.



Nice bike tho

OnEWhEeLNEAL

Thats why I bought the ones from ebay that come with 2 ramps. Size done matter if you got a ramp to walk up. Plus I wouldnt wanna buy the ramp you posted w the yami on it coz it doesnt fold up. And you should also get a arched ramp coz depending on the incline, your cage might bottom out when loading the bike

faceless

the black on i posted i got from home depot. 55 each. they are folding and arched. so its easier to load up. just go to home depot or lowes and ask for folding ramps.

Dilts646

YES you can Put the bike in gear walk next to it HAVE SOMETHING to step on and than into the back of the truck. . I usually use a cooler!

jebova2301

am i the only one thinking that r1 is gonna scrape like a bitch going the rest of the way on?

faceless

no its going too. sucks to be them

crashtest 750

i use a ten foot 2x10 with nails sticking out one end to lock into the bumper. Cheap easy and works great for me

blaine1160

buy a cargo van loads easy (astro van works good)

GeRiGiXXeR600

my 2 ramps... planning a 6" lift but i think they will keep workin ok anyway

greyghost300c

that ******* sweet im goin by home depot this afternoon!!
to check out there ****. Gotta do somthing this morning was a pain in the *** gettin my bike loaded

IV

i use one that look almost like this but folds in half. had it since i was about 14 for MX. i havent seen one like it in forever but i love it. my truck is lowered so i just leave the bike in gear, let the clutch out and walk next to it and just step on to the tailgate of my truck. beauty of a lowered truck. ill try and get some pics for you this weekend.

IV

its a two piece, it slides into itself making it half the size.

jstuntlocke

Man what an ordeal just to load up your bike! How do you get it down and back up at the lot then?

What you could do is just nail a couple 2x4's up to the backside of your plywood to make a stiffback kind of on it. Just to add some rigidity to it ya know.

And I haul a shitty little trailer only big enough for two bikes max, and a ramp I welded out of some old shelving material. Works great, but I used to knock it off the end of the trailer with my FI cage loop on my gix all the time... ONe time I almost got crushed too, but I was doin everything with the phone in my ear! LOL

didn't stop my conversation nor did I drop the phone either! Actually the only thing I dropped was that ****** FI cage in the mail to somebody else!

OnEWhEeLNEAL

Gotcha.