zx636d6f

im having a similar problem with my 06 but its cyl 4. what i did was switch both injectors, coil plug, and sparkplug from cyl 3 to number four to see if the problem stayed. it did so i swapped the harness, ecu, cdi box, and tip sensor from the other 06 636 i have and it didnt change anything. ive heard of this problem before and the things everybody told me to check were valves and valve clearances. your bike will run hit or miss if you have a valve with 0.0 but will inadvertaintly drop on a smooth idle. also, you can pull the valve cover and see if you have a valve sticking for any reason... hope thats some kinda help man, im still dickin with mine

Phillie Filler

x1000

i had one and it had a mean tick to it.... just didnt feel right riding it with the sound..


that will only be the begining of a money pit bike...

jbstunts

so its not gettin spark to any of the plugs correct?

INVINCIBLE73

also go through and check your ckps and cps. crank and cam position sensors.
how many miles on the bike? whats the last thing you did to it?

badyama1

tip over sensor isnt in the front fairing like a f4i its under the seat by the battery tray just thought id throw it out there.

tyshearman

No Im not getting any spark to any cyclinder and it doesnt sound like my fuel pump is turning on, I think it may be the tip over sensor now I found out they are very easy to break. I took it apart and duct taped the weight in place an mechanic friend of mine thinks thats the problem

OnPoint

So, did that fix the problem. You have to let us know once you get it running.

tyshearman

still waiting to get a new sensor but I will update

OnPoint

You can't just bypass it? On the F4i's you bridge the 2 outer wires on the 3 prong plug.

tyshearman

I tried jumpering it and there was no change, but a mechanic friend of mine said if you jumper it the bike will only run for a couple seconds. all you need to do is take the weight out of them on the Kawis.

h_lowder636

tip over sensor is a switch, its either on or off.....jump that **** and wont have to worry bout it ****** up again..

jbstunts

it could be your ignition to, if the fuel pump is not comin on and your not gettin spark it could be the resistor thing in the key switch, mine burnt out last year and it took all kinds work to figure it out

thumpmonkey

no pump no spark, its the bank angle/tip over sensor every time

tyshearman

I was thinking maybe ignition to but it cranks over like a **** just no fire, and its intermitent will fire sometimes but very rarely

OnPoint

Very good advice. He's absolutely right. I recently had this problem with my F4i, but I had ran a toggle switch with a resisted connected to the signal wire and from shoving it btw the frame and air box I broke the resister and the bike did exactly what yours is doing. I just didn't think of that for you because I didn't know that they also just burnout on their own. Try a def. Ignition from a friend or use a volt meter to see if when the ignition is on there should be 3 wires with 12 + volts and the 4th wire should have less, like 9 to 10 volts.

tyshearman

Just a little update, it was a bad tipover sensor that was not letting the bike run. For all those who gave me input. THANKS ALOT

OnPoint

Good ****! I'm happy to hear you got the bike running. I'm sure it was driving you crazy and once you heard her fire up it's like busting a nut. I know that feeling all to well.