gearing

Thread Tools
 
Search this Thread
 
Old 01-13-2009 | 05:15 PM
  #41  
Slammin Sammy's Avatar
Registered User
 
Joined: Aug 2008
Posts: 19
From: Salina, Ks, 67401
Slammin Sammy is a decent person
Re: gearing

I have an 05 gsxr with a 60 tooth rear and i can make the speedo read 188, sure the hell aint doin no 188, 140 if im lucky. No 600 will do 200 stock.
Old 01-13-2009 | 05:22 PM
  #42  
gixerz-n-dragin's Avatar
Registered User
 
Joined: Nov 2008
Posts: 89
From: gonzales la us
gixerz-n-dragin is a decent person
Re: gearing

Originally Posted by D Rail
162 couple hundred rpms before red lined in 6th with stock gearing

mind you this is with factory error on the speedo and all and non gps verified

wow we usually cruise arround at that speed....u need to check somethin out on that thing.
Old 01-13-2009 | 05:24 PM
  #43  
gixerz-n-dragin's Avatar
Registered User
 
Joined: Nov 2008
Posts: 89
From: gonzales la us
gixerz-n-dragin is a decent person
Re: gearing

sammy actuall the 05 gsxr 600 will do exactly the 187 that it tops out at stock i kno for a fact.

one of my buddies is a cop and we clockd him doin that.

or maybe it was the red/black paint that gave it 200 more hp to do that?..
Old 01-13-2009 | 05:31 PM
  #44  
YogiR6's Avatar
www.tobefast.com
 
Joined: Aug 2008
Posts: 1,115
From: Pikeville, Kentucky Pike County
YogiR6 is a decent person
Re: gearing

Originally Posted by gixerz-n-dragin
sammy actuall the 05 gsxr 600 will do exactly the 187 that it tops out at stock i kno for a fact.

one of my buddies is a cop and we clockd him doin that.

or maybe it was the red/black paint that gave it 200 more hp to do that?..

Definitely the paint. WAIT!?!?!?! Did he have a Nitrous Express Sticker on it too?!?!?!
Old 01-13-2009 | 05:45 PM
  #45  
gixerz-n-dragin's Avatar
Registered User
 
Joined: Nov 2008
Posts: 89
From: gonzales la us
gixerz-n-dragin is a decent person
Re: gearing

Originally Posted by YogiR6
Definitely the paint. WAIT!?!?!?! Did he have a Nitrous Express Sticker on it too?!?!?!
no nitrous stickers but he did have YAMAHA stickers on it!!!!!!!!!!!!!

WAIT!?!?!?!?!?would that cause it to go faster or slow down?????
Old 01-13-2009 | 06:55 PM
  #46  
YogiR6's Avatar
www.tobefast.com
 
Joined: Aug 2008
Posts: 1,115
From: Pikeville, Kentucky Pike County
YogiR6 is a decent person
Re: gearing

Originally Posted by gixerz-n-dragin
no nitrous stickers but he did have YAMAHA stickers on it!!!!!!!!!!!!!

WAIT!?!?!?!?!?would that cause it to go faster or slow down?????

Oh Snap!

Slower in the Straights but WAY Faster in the Corners.

Ask Rossi! He knows where its at!
Old 01-13-2009 | 07:15 PM
  #47  
gixerz-n-dragin's Avatar
Registered User
 
Joined: Nov 2008
Posts: 89
From: gonzales la us
gixerz-n-dragin is a decent person
Re: gearing

Originally Posted by YogiR6
Oh Snap!

Slower in the Straights but WAY Faster in the Corners.

Ask Rossi! He knows where its at!

so if it had a suzumaha sticker it be well rounded for both? lol ima get one made asap!!
Old 01-13-2009 | 07:19 PM
  #48  
YogiR6's Avatar
www.tobefast.com
 
Joined: Aug 2008
Posts: 1,115
From: Pikeville, Kentucky Pike County
YogiR6 is a decent person
Re: gearing

Originally Posted by gixerz-n-dragin
so if it had a suzumaha sticker it be well rounded for both? lol ima get one made asap!!
**** yeah cut too... Im down for one!
Old 01-13-2009 | 08:03 PM
  #49  
KANE>NIN's Avatar
Registered User
 
Joined: Jan 2008
Posts: 475
From: western Ny
KANE>NIN is a decent person
Re: gearing

when i had the stock gearing, fastest i had itt was like 158 on rural hwy with out much traffic, and it was starting to wind out
Old 01-13-2009 | 08:12 PM
  #50  
jebova2301's Avatar
www.frontiercycle.com
 
Joined: Jun 2008
Posts: 727
From: Illinois
jebova2301 is a decent person
Re: gearing

Originally Posted by Slammin Sammy
I have an 05 gsxr with a 60 tooth rear and i can make the speedo read 188, sure the hell aint doin no 188, 140 if im lucky. No 600 will do 200 stock.
exactly. most people dont realize how much the gearing can screw the speedo over. all it does is read the rpms from the output shaft of the transmission and calculate that into a speed. if you go from a 45 tooth to a 60 tooth in the back, you are going to be reading the same speed at a set rpm, but in reality, you will be going 25% or 33%(im not sure which) slower than the reading you are getting.
Old 01-13-2009 | 08:16 PM
  #51  
Rocketcrotch's Avatar
Registered User
 
Joined: Dec 2008
Posts: 303
From: Texas
Rocketcrotch is a decent person
Re: gearing

Originally Posted by jebova2301
exactly. most people dont realize how much the gearing can screw the speedo over. all it does is read the rpms from the output shaft of the transmission and calculate that into a speed. if you go from a 45 tooth to a 60 tooth in the back, you are going to be reading the same speed at a set rpm, but in reality, you will be going 25% or 33%(im not sure which) slower than the reading you are getting.
except for the ones with a speedo sensor on the front wheel.
Old 01-13-2009 | 08:18 PM
  #52  
jebova2301's Avatar
www.frontiercycle.com
 
Joined: Jun 2008
Posts: 727
From: Illinois
jebova2301 is a decent person
Re: gearing

Originally Posted by Rocketcrotch
except for the ones with a speedo sensor on the front wheel.
right...but if i remember right, just about all bikes put the speedo sensor on the rear wheel. or am i just getting confused? now you got me questioning myself.
Old 01-13-2009 | 08:19 PM
  #53  
big ben's Avatar
Thread Starter
CA STUNTER
 
Joined: May 2008
Posts: 1,972
From: charlotte
big ben is a decent person
Re: gearing

wow, my thread got raped...lol
Old 01-13-2009 | 08:25 PM
  #54  
lee majors's Avatar
Registered User
 
Joined: Nov 2007
Posts: 1,757
From: syracuse, ny,
lee majors is an unknown quantity at this point
Re: gearing

who cares if a bike can go 200mph or 500kph...you're never gonna need that ****. what was the original question again??
Old 01-13-2009 | 08:27 PM
  #55  
jebova2301's Avatar
www.frontiercycle.com
 
Joined: Jun 2008
Posts: 727
From: Illinois
jebova2301 is a decent person
Re: gearing

Originally Posted by big ben
wow, my thread got raped...lol
yeah...sorry about the thread jack. but seriously, if you want a bike that will have a top end, get a real 600cc sportbike(inline 4, not a v-twin), and dont excessively gear it. I would say you could easily add 5 teeth and still outrun that sv with no problem. if you went up 10, you should start to be close to being at the same speed as the sv. anything after that and i think you would be fast as all hell accelerating, but you wont be getting any huge top speeds
Old 01-13-2009 | 08:34 PM
  #56  
Gixxxer Guy Ed's Avatar
Registered User
 
Joined: Nov 2008
Posts: 325
From: sumwhere pa
Gixxxer Guy Ed is a decent person
Re: gearing

hey may be im stupid but i know my speedo said i was going 218(mph) when i last looked at it and i aint no squid been rideing for seven years know so **** you all on that one but like i said maybe im just stupid
Old 01-13-2009 | 08:39 PM
  #57  
Amir-R's Avatar
Registered User
 
Joined: Aug 2007
Posts: 184
From: California
Amir-R is a decent person
Re: gearing

Originally Posted by Gixxxer Guy Ed
hey may be im stupid but i know my speedo said i was going 218(mph) when i last looked at it and i aint no squid been rideing for seven years know so **** you all on that one but like i said maybe im just stupid
you have probably been riding around with your gauge set to km/h
Old 01-13-2009 | 08:40 PM
  #58  
gixerz-n-dragin's Avatar
Registered User
 
Joined: Nov 2008
Posts: 89
From: gonzales la us
gixerz-n-dragin is a decent person
Re: gearing

Originally Posted by Gixxxer Guy Ed
hey may be im stupid but i know my speedo said i was going 218(mph) when i last looked at it and i aint no squid been rideing for seven years know so **** you all on that one but like i said maybe im just stupid
maybe u was lookin at it backwards and it really said 812 mph?

lol just playin had a boring day had to brightn it up.
Old 01-13-2009 | 08:43 PM
  #59  
$$$$DINO$$$$'s Avatar
Registered User
 
Joined: Jun 2006
Posts: 3,112
From: 17013,PA,us
$$$$DINO$$$$ is a decent person
Re: gearing

Originally Posted by Gixxxer Guy Ed
hey may be im stupid but i know my speedo said i was going 218(mph) when i last looked at it and i aint no squid been rideing for seven years know so **** you all on that one but like i said maybe im just stupid
ahhfuckit

Last edited by $$$$DINO$$$$; 01-13-2009 at 08:46 PM.
Old 01-13-2009 | 08:44 PM
  #60  
Gixxxer Guy Ed's Avatar
Registered User
 
Joined: Nov 2008
Posts: 325
From: sumwhere pa
Gixxxer Guy Ed is a decent person
Re: gearing

hey at least im attmiting i might be stupid as hell but im not gonna turn this in to another thread like that **** dis **** one wow that was fun reading


Quick Reply: gearing



All times are GMT -4. The time now is 10:49 AM.