magura hb rebuild kit?
#1
magura hb rebuild kit?
Where can I find a rebuild kit for this thing? Need new seals.
Waiting on an e-mail back from hai now but I figured maybe someone up here had ordered one b/4.
Waiting on an e-mail back from hai now but I figured maybe someone up here had ordered one b/4.
#3
Re: magura hb rebuild kit?
My magura 16mm is bleding down internally when you hold pressure on it.... its getting worse, if you hold tight with two fingers it only takes maybe 4 seconds before its on the bar...... The funny thing about it, it only took a COUPLE coaster wrecks to finger her out...
#5
Re: magura hb rebuild kit?
yeah email em, someone on here (not real sure who it was...wanna say Sketchy but not positive) was dealing Magura masters but turned it over to HoHey and Im pretty sure they can get parts cause a few people were wanting bleeders for em...keep us posted good info to have for those with Maguras
Last edited by JMZ; 12-15-2008 at 10:25 PM.
#7
Re: magura hb rebuild kit?
Mine works fine w/ constant pressure but here's where it sucks. If you are getting on and off it w/o completely letting off, it starts to lose pressure. If I let completely off for just a second it will come right back. It's like somewhere about halfway in the stroke there is a spot where it's bypassing. Very weird problem and kinda hard to explain.
It's annoying b/c everytime I feel that it's getting too weak I have to let completely off for a second and then go until it happens again. It takes a good 15-20 seconds for it to happen so it's not that bad. It just shouldn't be like this and I know it's gonna get worse.
#8
Re: magura hb rebuild kit?
If I find something I will let you guys know. What's the model # for these? Anyone know? I can get parts from Parts Unlimited through work so I will check that tomorrow as long as I have the correct model #.
195?
195?
Last edited by melloyello; 12-15-2008 at 10:28 PM.
#9
Re: magura hb rebuild kit?
magura radial master c
0611-0006
195.5
#13
Re: magura hb rebuild kit?
Wow does no one use google?
http://beemerboneyard.com/34311454438.html
http://www.google.com/search?q=magur...ient=firefox-a
http://beemerboneyard.com/34311454438.html
http://www.google.com/search?q=magur...ient=firefox-a
#14
Re: magura hb rebuild kit?
Wow does no one use google?
http://beemerboneyard.com/34311454438.html
http://www.google.com/search?q=magur...ient=firefox-a
http://beemerboneyard.com/34311454438.html
http://www.google.com/search?q=magur...ient=firefox-a
#15
Re: magura hb rebuild kit?
http://www.mikesxs.net/mikesxs-chass...ategory_id=1.2
Master Cylinder Rebuild Kit Rebuild Kit for 16mm. Magura Master Cylinder XS# 08-0251Part #08-0288 $30.00 USD ea
Master Cylinder Rebuild Kit Rebuild Kit for 16mm. Magura Master Cylinder XS# 08-0251Part #08-0288 $30.00 USD ea
#16
#17
Re: magura hb rebuild kit?
http://www.mikesxs.net/mikesxs-chass...ategory_id=1.2
Master Cylinder Rebuild Kit Rebuild Kit for 16mm. Magura Master Cylinder XS# 08-0251Part #08-0288 $30.00 USD ea
Master Cylinder Rebuild Kit Rebuild Kit for 16mm. Magura Master Cylinder XS# 08-0251Part #08-0288 $30.00 USD ea
#19