melloyello

Where can I find a rebuild kit for this thing? Need new seals.
Waiting on an e-mail back from hai now but I figured maybe someone up here had ordered one b/4.

JMZ

Have you tried HoHey?

Lit

My magura 16mm is bleding down internally when you hold pressure on it.... its getting worse, if you hold tight with two fingers it only takes maybe 4 seconds before its on the bar...... The funny thing about it, it only took a COUPLE coaster wrecks to finger her out...

melloyello

I don't see it on their site but I will e-mail or call them. Thanks.

JMZ

yeah email em, someone on here (not real sure who it was...wanna say Sketchy but not positive) was dealing Magura masters but turned it over to HoHey and Im pretty sure they can get parts cause a few people were wanting bleeders for em...keep us posted good info to have for those with Maguras

Lit

opps, i didnt mention... if your nice enough, when you find out about that post it up on here... i sure would like my 269 dollar master to actually work too

melloyello

Mine works fine w/ constant pressure but here's where it sucks. If you are getting on and off it w/o completely letting off, it starts to lose pressure. If I let completely off for just a second it will come right back. It's like somewhere about halfway in the stroke there is a spot where it's bypassing. Very weird problem and kinda hard to explain.
It's annoying b/c everytime I feel that it's getting too weak I have to let completely off for a second and then go until it happens again. It takes a good 15-20 seconds for it to happen so it's not that bad. It just shouldn't be like this and I know it's gonna get worse.

melloyello

If I find something I will let you guys know. What's the model # for these? Anyone know? I can get parts from Parts Unlimited through work so I will check that tomorrow as long as I have the correct model #.
195?

Lit

im looking at my orginal box right now,,, i have this


magura radial master c
0611-0006
195.5

melloyello

thanks

LilEvil

makes me want a magura

Lit

as you post more wee one you will want one.....

OnEWhEeLNEAL

Wow does no one use google?

http://beemerboneyard.com/34311454438.html

http://www.google.com/search?q=magur...ient=firefox-a

melloyello

I did but guess I didn't look good enough. That first one says it's a rear rebuild kit.

OnEWhEeLNEAL

http://www.mikesxs.net/mikesxs-chass...ategory_id=1.2



Master Cylinder Rebuild Kit Rebuild Kit for 16mm. Magura Master Cylinder XS# 08-0251Part #08-0288 $30.00 USD ea

OnEWhEeLNEAL

No doubt. I dunno if those are the right ones but I guess call em up and see

JMZ

Gonna guess that ones for a 16mm

JohnnyP

I have all the part numbers for the billet masters, 13/16/20....If you need them, but Im pretty sure they arent the same for the forged ones..

K5

doesn't HAI Bikeshop sell the rebuild kits

-SKETCHY-

I can get them. Is it a 190 or 195? 13 or 16mm?