johnnybmore has this set up on his bike.......we bled it one time and it works perfect....

 

bleed it better.

 

+1

I unbolted my rear master also, and flipped it around, just to make sure I got every bubble out

only 1 bolts, takes 1 minute to unbolt just to make sure all the air is out

 

just gotta add some old school outermost style to it with some clamps and jbweld to the rear master!! its all good after that!

-kane

 

I don't have any of that on mine and it's solid as ****. Never had a leak or anything. And my handbrake works sick.

 

well... looks like you have got a bunch of advice and solutions for your problem you were having now. I'd probably try them out and see if all of the above doesn't fix what you are experiencing or not.

With all of these posts and sucess testimonies, I would say that it's most likely user/installer error... And maybe a little bit of hohey envy mixed in with it! (It's OK though.... I got it too!)

 

This is why from the start I made my own adapters for $2, and TIG weld them onto the master cylinder...They will never leak, and then you can focus on bleeding...Then if theres a problem its not the adaptor....

 

hells yeah. ima deff go that route then. i got several front right 600RR non radial calipers laying around. thanks *****.

 

I've had the GP Tech adapter for 2 years and haven't had one problem with it.

 

jordo isnt this the same thing

http://www.haibikeshop.com/index.php...oducts_id=1170

this is what i have

 

It's the same idea but better than a gp tech.

 

didnt i sell you an adapter?




the ones i make are machined with such tight tolerances, no JB weld or clamps are necessary.

 

Yup, put it on my friends bike (already got a gp tech on my bike)
https://www.stuntlife.com/forums/467...6-stock05.html

Still haven't got around to trying that pedal adapter.. but I'm definitely gonna give it a whirl once I get ahold of a free bmx pedal


Dunno if you NEED a hose clamp or not, but I run one just for safety.. $1 part that COULD save you

 

ive always used the fitting and never had any trouble if its all bled right..
also never realy wanted to use the foot and the handbrake at the same time? who does? and why?

although i would like the duel caliper kit for the 1 finger lock up but im fine without it so till i got the money to just throw around ima stick with the fitting..

 

i have the FTI adapter and mine works fine.....solid brings me off the bar no problem.

number 2 the handbrake master guy dude said i have one of the best feeling handbrakes around even.


so i would say it is user error not bleeding it right.


although mine is stiffer if i pump it once before clutch up.....but thats not a big deal cuz i do that to bring the bike to a dead stop anyways.

 

thats the only way I would trust one of those , I had one hoseclamped and smashed the brake hard once and poped the o-ring. got it welded but ended up getting a DC right after.

 

yea..and to me next! He's the one I talked to about it.


You can't lock up your rear with one finger and a fitting? wow!

I have ridden alot of guys bikes that the fitting gave me one finger lock up. The most impressive one was Josh Clem's new R6 right after he got that magura master.
My K6 locks up one finger with a brembo and a welded fitting too and it's not even a fitting it's the part of an old non-radial master where you screw in the banjo that I cut off and welded on! LOL
This time I'm goin with one of Mr. Chino's...