929/954 ??
#21
Re: 929/954 ??
#22
Re: 929/954 ??
Nags you could be correct on length... I know they are interchangeable though, which I believe is the question at hand when building a sub cage....
Going outside to look at both bikes now...
Going outside to look at both bikes now...
#23
Re: 929/954 ??
Well if he's trying to put them in the stock location and the lengths are different it might make a difference
#25
#27
#28
Re: 929/954 ??
exactly. If someone could measure the width of the tabs ( front hole on left side to front hole on right side, and back holes the same way), then measure from where the subframe bolts to the main frame back to the peg bracket tabs that would be super. We have a subcage ready for the 929's, but not sure if they will fit the 954's. Thanks guys.
Last edited by PUNKON1WHEEL; 11-10-2008 at 04:19 PM.
#30
#31
Re: 929/954 ??
subframes are different, but pegs and brackets are the same and interchangeable, I know it because I run 929 pegs and brackets on my 954!!!
the only small difference is the exhaust mount on the right bracket, the angle is a lil bit different but I solved it with some washers, but maybe it´s the mounting tab on my exhaust that might be bend and that´s where the difference comes from.
the only small difference is the exhaust mount on the right bracket, the angle is a lil bit different but I solved it with some washers, but maybe it´s the mounting tab on my exhaust that might be bend and that´s where the difference comes from.
#32
Re: 929/954 ??
most def! the 2000 929 and the 2002 954 were completely different breeds of bike........ the only parts that were interchangeable were the tires, turn signals and clutch lever.
#33
#34
#35
#36
Re: 929/954 ??
#39
#40
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: 929/954 ??
p.s i sell less 929/954 subcages then any thing else so don't make too many ahead of time