Calling aLL NY stunters and stunteresses
Re: Calling aLL NY stunters and stunteresses
ive only had DB for the lot, im trying out clip ons too. just not sure if i want vortex to keep a closer to stock height or SI or somthing to get a rise......?
RR OR 05+ R6/R1 radial mc...... ive been using the R6/R1 and been pretty happy with it.
i'm keeping that on my S.M..... now have a magura 13mm to go with my HHD big rotor kit on order for my new build for my R6. im looking forward to that set up!!!
yeah blue's a nice spot!! i like bear creek too. i gotta get out this year. its been like 7+ years since i went boarding. i used to go all the time. i gotta get a new board and get back in the game!!!
i'm keeping that on my S.M..... now have a magura 13mm to go with my HHD big rotor kit on order for my new build for my R6. im looking forward to that set up!!!
Im down...
And for you guys wanting to get a mega snow session together... lemme know. I got hookups at some mountains down here..
Blue mountain is your best bet down here. Largest and offers the most stuff.
www.skibluemt.com
And for you guys wanting to get a mega snow session together... lemme know. I got hookups at some mountains down here..
Blue mountain is your best bet down here. Largest and offers the most stuff.
www.skibluemt.com
Re: Calling aLL NY stunters and stunteresses
u dont want me to show what i found in daddys draw uncle nealAttachment 234693
Re: Calling aLL NY stunters and stunteresses
Don't even go there. My bike still isn't done, tires dead, and it's not registered yet. I need to get it on the street before I can turn into Sam.
Last edited by Tone The Natural; 12-10-2009 at 11:11 AM.
Re: Calling aLL NY stunters and stunteresses
MikeM or Inolen what do I do for the Kleen air mod on this 636..I know to use the search and I did but i was counting on pictures and there not showing up for me...so what do I do?
Re: Calling aLL NY stunters and stunteresses
https://www.stuntlife.com/forums/443...=kleen+air+mod
and here's an easier shorter thread w pics
https://www.stuntlife.com/forums/2-s...=kleen+air+mod
Re: Calling aLL NY stunters and stunteresses
Go pick up 2.5 ft or so of 1/2" fuel hose.
Go to home depot's hardware section and in the misc. drawers next to the nuts and bolts and look for I think they're called screw/bolt covers. They look like this:
I think you need one yellow and one gray one. I always just pick up a couple of them and put on whatever ones fit.
Go home, take off your airbox and disconnect the 2 hoses running to the airbox. Disconnect the other ends of the hoses from the motor, and run that 2.5 ft of fuel house to where they were connected on the motor. Take the rubber covers and place them on the airbox where the hoses used to attach. Now go back to the T where the one big hose was connected and you'll see a tiny hose running out of the bottom of the T, disconnect that hose from the T and put a small screw in it.
Go to home depot's hardware section and in the misc. drawers next to the nuts and bolts and look for I think they're called screw/bolt covers. They look like this:
I think you need one yellow and one gray one. I always just pick up a couple of them and put on whatever ones fit.
Go home, take off your airbox and disconnect the 2 hoses running to the airbox. Disconnect the other ends of the hoses from the motor, and run that 2.5 ft of fuel house to where they were connected on the motor. Take the rubber covers and place them on the airbox where the hoses used to attach. Now go back to the T where the one big hose was connected and you'll see a tiny hose running out of the bottom of the T, disconnect that hose from the T and put a small screw in it.
Re: Calling aLL NY stunters and stunteresses
Go pick up 2.5 ft or so of 1/2" fuel hose.
Go to home depot's hardware section and in the misc. drawers next to the nuts and bolts and look for I think they're called screw/bolt covers. They look like this:
I think you need one yellow and one gray one. I always just pick up a couple of them and put on whatever ones fit.
Go home, take off your airbox and disconnect the 2 hoses running to the airbox. Disconnect the other ends of the hoses from the motor, and run that 2.5 ft of fuel house to where they were connected on the motor. Take the rubber covers and place them on the airbox where the hoses used to attach. Now go back to the T where the one big hose was connected and you'll see a tiny hose running out of the bottom of the T, disconnect that hose from the T and put a small screw in it.
Go to home depot's hardware section and in the misc. drawers next to the nuts and bolts and look for I think they're called screw/bolt covers. They look like this:
I think you need one yellow and one gray one. I always just pick up a couple of them and put on whatever ones fit.
Go home, take off your airbox and disconnect the 2 hoses running to the airbox. Disconnect the other ends of the hoses from the motor, and run that 2.5 ft of fuel house to where they were connected on the motor. Take the rubber covers and place them on the airbox where the hoses used to attach. Now go back to the T where the one big hose was connected and you'll see a tiny hose running out of the bottom of the T, disconnect that hose from the T and put a small screw in it.
Re: Calling aLL NY stunters and stunteresses
Ok so from what I can tell, in stock form, the crankcase and the valve cover both vent into the airbox. By doing this mod, you basically just connect the 2 vents to each other. I wonder what happens to the pressure that builds up inside the engine.
Re: Calling aLL NY stunters and stunteresses
On cars its bad. Pressure gets built up and you can start blowing seals out. Thats why most will just run a filter off the pcv valves. Im not going to do the clean air mod on my f4i. I'm going to plum the hoses into a sperate canister. With a slight hole poked in top. That'll save the oil from going into the throttle bodies and not let it spill out onto the ground if i use a filter.