anyone?

 

good luck mabey brembo

 

cant you just use a clamp of another brake lever

 

i dunno what the **** it's called.

tryin to get everything ordered and shipped so when i finally see my bike again i'll have what i need for the HB and 4pot setup. :YEAH

 

i think i looked at my stock one and the holes were staggered or something between the two

 

brembo

 

yeah? find it for me on their site, would ya?

"various" in their catalog lists a bunch of ****.. but not a mount bracket or anything like it.

 

I used that part *I call it a C bracket* off a R6 master cylinder on my brembo. I used the bolts that came with the brembo and the C bracket from an old R6 master.

Take the brembo out to a salvage yard and look for a C bracket that the holes match up on the brembo .

 

c bracket, thanks.

i dunno if there's any bike salvage yards anywhere near me, and everyone who has the bracket also has the mc and wants to keep it or sell it together.

 

pretty sure the one off an r1 will work too , brembo makes the master for the r1

 

anyone got a r1/r6 c bracket then?

 

I have one.... $45

 

is it for your 636? If so, go to bikebandit................. Took me 30 secs. to find it......

43034:
HOLDER-BRAKE,MASTER C

1822306-001 Enter 0-99 $12.72

Look under OEM, find the zx6r, then go to Front Master Cylinder Schematic..........

Hope I helped bro! 12 bucks is a sweet deal.

 

ha. toss a pair of $20's in the box when you ship it to me, and you got a deal.


this is for a brembo mc for my handbrake.. not the nissen or whatever is stock on the 636.

 

wont work on a brembo rear plate will work they are cut at an angle unlike the other stock plates on most masters

 

Bend some 1/8" steel plate and make one to whatever specs you want

 

im like 900 miles from my bike and just want to ride it when i get back to texas in a few months. don't have the tools and **** here to do all that.

 

buy a frembo.... that way you have the bracket you need and a rebuild kit

buy my frembo