SBFMC - Bumper

so...those of u stuntin this bike know how hard it is to set up. is there anyone out there that has this bike completely dialed in and workin? lets make this a centralized thread for us to share information.

stock05

simpsons did it.

deejayarecue

what problems are you having setting it up? the biggest pain is putting the idle cable in and unplugging the speed sensor but other than that .

im sure you seen bullo murder his 07rr. coltons bout to start murdering one. + many others. im just starting but it seems easy to learn on.

SBFMC - Bumper

the bike seems to react funny when turning up the idle. any higher than about 2700 rpm and the rpms wanna shoot up to about 5k and not go down. just...doesnt feel right

FreezeSBFreaks

you just suck at stunting and need to quit

Armenian

your not the only one with that problem dude. ******* sucks. thats why in a day or 2 here im putting my **** up for trade for a 636 again.

SBFMC - Bumper

lol...****** freeze! love you too bro. haha

apparently...rumor says colton has all the kinks on the bike worked out. there's gotta be a secret someone isnt sharing as far as setting this bike up. because everyone but bullo and colton are having issues with it...

deejayarecue

its been said many times but ill say it again... you MUST unplug the speed sensor for the idle to work correctly. you will loose your speedo but its easy to connect and disconnect. here's a pic of the connector below, this is the left side of the bike.

SBFMC - Bumper

i did do that...still acts funny.

TongWoo

Yo Nags!! Bumper iss my boy and he has some valid points. This bike is a total pita to setup and there is a deal with the idle jumping just like the 954. Nags, can we get a STICKY?

OFFICIAL 07 08 600RR fix it thread!!!

Armenian

i just hate the ******* balance point on mine. (2006)

GORBO

I think bullo was talking about how to fix it in a thread a while back

rocgotblox

i was having the same problems but i got it now !the bike is awsome
check the little hose under the air box and unplug the speed sensor

SBFMC - Bumper

yeah...thats all been done...seeing how i gave u that advice..lol how high are u able to run your idle without problems roc?

gsxr"d

Its perfect with a 55 tooth on the rear. As for the idle on it it wasn't too jumpy on the bike I had till the cage I had on it went straight through the frame!!!! Its a cool lil bike.

old man roger

i didn't like the strange engine brake on the ones i rode and the rear peg position sucks ...

i move the rear pegs down back and out on my omr subcages for the 600rr ,it makes the bike feel a lot roomier in the staggered position and i also rotate the peg brackets forward on there axis so the rear peg doesn't fold up during a wheelie ..

crazy636stunter

i took thre upper off of mine and put a db set up on it. after that the idle was fine. im not sure what fixed it... i thought it was un plugging the speedo sensor. also.... the omr subcage is a must for this bike, dont bother stunting it without one!!!

deejayarecue

damn, dunno what the problem could be because mine rode fine once i unpluged the speed sensor . i would re-check your work around the airbox. could have missed a plug or hose after putting your idle cable in?

im learning on my 07 still but heres a few thoughts...

*must unplug speed sensor after installing idle cable for it to idle correctly. also reduces the engine brake at slow speeds.

*omr subcage is a must if your anywhere near 6ft. the bike is cramped stock.

*tygershark makes the best cage to keep the bike from rolling up on the tank. i just learned my lesson with my FI.

****right rearset can possibly snap at the master cylinder over time from heavy brake rapage. i read about this happening to someone else on SL so run aftermarket rearsets to be safe.

dunno about gearing, im still stock while i learn.

woodcraft just came out with some nice clipons.

can't think of anything else. what does everyone else think?

TongWoo

My rearset snapped at the master in a fast 3rd gear sitdown no hander. I saved it, but it scared the **** outta me.

-I run the woodcraft clip ons flipped. They are the bomb.

Mikey SBF

yeah i think thatll be the next bike i go for, keep it up, get the kinks worked out so i dont have to haha