Right now im runnin -1 in the front and +3 on the rear (+6 total ) and i didnt feel a lot of differance from the stock gearing. Im tired of poppin wheelies on the hwy and wanna have a gearing setup on my bike where i can cluch up slow wheelies and do circles but still ride on the street and do 50 60 mph. any gearing advice for a rear sprocket size? id hate to spend too much $$$ trying size after size, lol.

 

Gearing wont make you ride a slow wheelie.

Gearing will make almost no difference for your wheelies until you are wheeling STEADY under 15mph..



Now doing wheelies under 10mph, and doing circles, are easier with gearing. But if you can't rock idle, you have no reason to re-gear! You have PLENTY of gearing right now.

http://www.youtube.com/watch?v=ClZ2rji_mUw



edit: and incase you think OMR is just a badass, and thats why he can do it on stock sprockets..

Here is my squid ***, the first day I learned to control a scrape, stock gearing..
http://www.youtube.com/watch?v=sucTCeLpJjY

I also was hitting 2+ circles on stock gearing before I re-geared my bike

 

OMR's a bad mother - shut yo mouth.

 

ok, ill just take the $$$ i was gonna spend on regearing and spend it on GAS and practice, lol. thanks 4 the advice.....

 

if your set on re-gearing any way. i ride an f4i 02 im -1 +8. I can run 55 at around 6500. its good gearing for both.

 

10 teeth
all a redneck needs

 

im geared +7 and theres nothing my bike wont do in the lot or on the streets. and ive done it all on stock gears it just wears on the clutch a little more clutching up from a dead stop

 

gearing makes learning a whole lot easier

I lfirst scraped on a 98-02 zx6r with -1 +3 gearing

I put a +6 on there and it got easier real quick

 

Well from the geared bikes I tried, and watching my friends add gearing before they are ready, all I've noticed is them get a whole lot more choppy compared to there super smooth wheelies with stock gearing..

And wouldn't -1 +3 pretty much be the same as +6?

 

Iv seen people who are not ready for gears ride choppy wheelies thinking its easy. but watch them eat crap because there not ready. Always respect your bike . Just think if its that much easier to get up its that much faster you will land on your back if your not ready.Just letting off the gas and hitting the brake could send you over the handle bars on a geared bike .

 

-1 +6 if common sense wouldnt tell you that

 

I definately agree with that.

On my 06 gsxr 600, I put -1 +4 and it made a HUGE DIFFERENCE compared to stock.

 

whats ur top speed say when ur tacked out??? i got -1 +5 and the fastest i have gottin mine reading is 184 with no speedo healler and its just about redlined

 

I can't guess your gearing, can only go off what you said..

 

+7. .its like nike . .just do it . lol

 

+8 for lots and street

 

-1 +5 is right around 20% error on the speedo on top of whatever error it comes with from the factory... u do the math.

 

I have an 04 r6 and i'm -2 +4 and the fastest i got her was 165 redlined.

 

maths not my thing
b4 i geared it i got it up to 160+ alil and thats about how fast it feels like im goin when its readin 180s. i kindda wanna hook the stock sprocket back up know that my skill level is higher and see what it can do for speed and try doin wheelies stock

 

Not