trz

I have a 06 gsxr 600 and i wanna put a rear hand brake on but i dont wanna buy the kit that crap is like 200$ anyone know wat they used the CHEAP way :> :YEAH

str8edge24

look on ebay but remember you get what you payfor

Big R 508

s e a r c h.


ho hays dual caliper.

full throttle inc.

there aint no cheap for handbrake.

Scott982

I have a 954 master cylinder and a steel braided line from my old setup. I'll sell it pretty cheap then all you would need is an adapter from full throttle or gp tech.

NOTORIOUS1

just get another rear master and take it to someone who is good at welding aluminum. all you have to do is cut the threaded part off of one then cut the cut the resevoir inlet of the other. you weld the threaded part to where the resevoir inlet was. that is the best handbrake for the money. $20 for an extra rear master and prolly $20 or $30 to have someone weld it. then all you need is a handbrake master. i would go with a dual caliper setup but if you cant afford it this works pretty well.

HECK

200 isn't expensive for a handbrake. my last setup was 600 dollars when it was all said and done.

Scott982

Mine was around $600 also. The stuff adds up quick but is completely worth it.

$250 Hohey four piston bracket and brake line
$250 Brembo 16x18
$75 929 front right caliper with pads
$15 Brake fluid

artief4izzle

i wouldnt recommend goin cheap in anyway shape or form on a hand brake i went cheap on myh last bike and i paid for it big time when i suddenly lost pressure doin a seat stander my set up that im puttin together now is gonna cost me just about the same as what everyone else is say 600 bucks dual caliper bracket is def the way to go if u loos your foot brake u atleast got your handbrake as back up

old man roger

gp tech or full throttle adapter , ss line and a used gsxr 1000 radial master is the best bang for your buck if you wanna go cheap...

but like str8edge said "you get what you pay for"