Custom Bearings
#1
Custom Bearings
Anyone know where you can get them made. Basically i have been through hell trying to get a 929/954 lower triple for my r1 forks i have tried 2 people on the forums here and both waited over a month and never received... 1 i was refunded for.
Basically long story short need a custom tapered roller bearing 30X47X15 (like the all ***** bearings) for the upper triple on the f4ez so i can use either a r1 triple clamp or gsxr triple and make things easy on myself.
or if someone knows where i can ACTUALLY get a 929/954 triple.
Basically long story short need a custom tapered roller bearing 30X47X15 (like the all ***** bearings) for the upper triple on the f4ez so i can use either a r1 triple clamp or gsxr triple and make things easy on myself.
or if someone knows where i can ACTUALLY get a 929/954 triple.
#2
Re: Custom Bearings
use the complete R1 triple. The bottom triple will drop right into an F4i with no modding needed
For the upper bearing you need a special one. See the pic of the box with part # (it's a 1-piece sealed bearing). Get it, remove your upper bearing race in the frame, tap in the new bearing and you're done.
For the upper bearing you need a special one. See the pic of the box with part # (it's a 1-piece sealed bearing). Get it, remove your upper bearing race in the frame, tap in the new bearing and you're done.
Last edited by skidmark; 07-26-2008 at 05:28 PM. Reason: uploaded the pic
#5
Re: Custom Bearings
I mis read what you said. I thought you meant the r1 would just drop right in without changing anything.
Yeah that is the exact problem i was having the f4i, R1 and GSXR lower bearings are the same.... But F4i upper was different from the R1 and GSXR
THANK YOU!
Yeah that is the exact problem i was having the f4i, R1 and GSXR lower bearings are the same.... But F4i upper was different from the R1 and GSXR
THANK YOU!
#6
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: Custom Bearings
use the complete R1 triple. The bottom triple will drop right into an F4i with no modding needed
For the upper bearing you need a special one. See the pic of the box with part # (it's a 1-piece sealed bearing). Get it, remove your upper bearing race in the frame, tap in the new bearing and you're done.
For the upper bearing you need a special one. See the pic of the box with part # (it's a 1-piece sealed bearing). Get it, remove your upper bearing race in the frame, tap in the new bearing and you're done.
#7
Re: Custom Bearings
After doing a little research you can also use NSK part # HR32906J
Which is the same diameter bearing. But is a Tapered Roller bearing like the all ***** bearings.
Which is the same diameter bearing. But is a Tapered Roller bearing like the all ***** bearings.
#12
Re: Custom Bearings
use the complete R1 triple. The bottom triple will drop right into an F4i with no modding needed
For the upper bearing you need a special one. See the pic of the box with part # (it's a 1-piece sealed bearing). Get it, remove your upper bearing race in the frame, tap in the new bearing and you're done.
For the upper bearing you need a special one. See the pic of the box with part # (it's a 1-piece sealed bearing). Get it, remove your upper bearing race in the frame, tap in the new bearing and you're done.
I know you said R1, but this part will work with any gixxer front end also?
that's the only thing needed to use it if I find a whole new R1 front end?
How much does that bearing run?
thanks...
#13
Re: Custom Bearings
Lol i get get in through tucker rocky at work (motorcycle dealership) for about 4 dollars employee cost haha.
A side not its the 6906-2RS bearing which is the EXACT same as the bearing skidmark is talking about.
A side not its the 6906-2RS bearing which is the EXACT same as the bearing skidmark is talking about.
#14
Re: Custom Bearings
i just baught a 1999 r1 front end for my f4i who makes 6906-2RS bearing
and is this right 30x47x9...
im a new rider and after reading this page i went out and got a full front-end
Last edited by franz; 04-05-2009 at 10:28 PM.
#15
Re: Custom Bearings
if theres people rolling hundreds of feet on stock f4i front ends then why throw it in the trash and get a 929/954/R1 front end? if anything whynot just beef it up with better springs and fluid? i'll admit they do pogo and are a royal pain in the *** to learn stoppies on, but i did it and i dont have a damper or any mods except handlebars and steel lines. and my right fork seal leaks and has a sock zip tied around it.
#17
Re: Custom Bearings
https://www.stuntlife.com/forums/443...waps-what.html
#20
Re: Custom Bearings
yep, i couldnt remember the name, but there is an applied down the road from my work. They have EVERYTHING in there. U bring em your size and theyll have tons for u to choose from...