r6 tip over sensor
06-24-2008, 12:33 PM
#1
Registered User
Thread Starter
Join Date: Aug 2005
Location: Costa Mesa....... BrInGeN cA bAcK
Age: 40
Posts: 2,063
r6 tip over sensor
hey what up ...i tried searching for the tip over sensor mod on the r6 but couldnt find it..does anyone know how to do this mod or have a link to the thread that shows u how? thanks for the help
06-24-2008, 02:40 PM
#6
Registered User
Join Date: Dec 2006
Location: central texas
Age: 39
Posts: 229
Re: r6 tip over sensor
take the cover off before you silicone it, and just use a tiny amount to hold the pendulum in place then put the cover back on it.
if you drill a hole and just start pouring silicone in the hole, the pendulum moves around from the pressure and you will probably end up with it in the kill position.
if you drill a hole and just start pouring silicone in the hole, the pendulum moves around from the pressure and you will probably end up with it in the kill position.
06-24-2008, 02:43 PM
#7
Registered User
Join Date: Oct 2004
Location: Anywhere wheelies happen
Age: 37
Posts: 5,868
Re: r6 tip over sensor
take the cover off before you silicone it, and just use a tiny amount to hold the pendulum in place then put the cover back on it.
if you drill a hole and just start pouring silicone in the hole, the pendulum moves around from the pressure and you will probably end up with it in the kill position.
if you drill a hole and just start pouring silicone in the hole, the pendulum moves around from the pressure and you will probably end up with it in the kill position.
use as much silicon as you can fit in there
last thing you want is your bike to shut off mid wheelie
06-24-2008, 02:45 PM
#8
Registered User
Join Date: Jan 2006
Location: TeXaS
Age: 38
Posts: 250
Re: r6 tip over sensor
take the cover off before you silicone it, and just use a tiny amount to hold the pendulum in place then put the cover back on it.
if you drill a hole and just start pouring silicone in the hole, the pendulum moves around from the pressure and you will probably end up with it in the kill position.
if you drill a hole and just start pouring silicone in the hole, the pendulum moves around from the pressure and you will probably end up with it in the kill position.
Last edited by o0kawi_boi0o; 06-24-2008 at 02:50 PM.
06-24-2008, 05:53 PM
#10
Registered User
Thread Starter
Join Date: Aug 2005
Location: Costa Mesa....... BrInGeN cA bAcK
Age: 40
Posts: 2,063
Re: r6 tip over sensor
well my little tip sensor burnt out where it connects to the wire harness...so im wondering if i could like cut some wires or something and eliminate the tip sensor completely......????anyone????
Thread
Thread Starter
Forum
Replies
Last Post
