Honda Toughness: Your experiences...

Thread Tools
 
Search this Thread
 
Old 04-30-2008 | 02:43 PM
  #1  
bikerboy's Avatar
Thread Starter
I Have Too Much Free Time
 
Joined: Jul 2003
Posts: 10,265
From: San Diego, Ca
bikerboy has a spectacular aura aboutbikerboy has a spectacular aura about
Honda Toughness: Your experiences...

OK, long story short, so I will pick up this 07 CBR 1000RR Thurs or the latest Fri.

Anyhow, I haven't had a Honda in about 10yrs. I have had a few Kawis and Zuks for yrs.

Anyhow, what do you think the overall abuse limit? I rode the hell out of my Gix 1000 and did me fine. Never had a problem.


Have you heard of any probs with the cbr 1000s?
Old 04-30-2008 | 02:47 PM
  #2  
Lethal Rider's Avatar
ITS A LETHAL WORLD !!!!
 
Joined: Jul 2005
Posts: 1,527
From: West Coast
Lethal Rider can only hope to improve
Re: Honda Toughness: Your experiences...

Originally Posted by bikerboy
OK, long story short,

did your meth run low







i kid,i kid
Old 04-30-2008 | 02:48 PM
  #3  
bikerboy's Avatar
Thread Starter
I Have Too Much Free Time
 
Joined: Jul 2003
Posts: 10,265
From: San Diego, Ca
bikerboy has a spectacular aura aboutbikerboy has a spectacular aura about
Re: Honda Toughness: Your experiences...

Originally Posted by Lethal Rider
did your meth run low

i kid,i kid
No, just getting old.... haha
Old 04-30-2008 | 03:16 PM
  #4  
Trachito's Avatar
Registered User
 
Joined: Feb 2006
Posts: 23,446
From: down souf
Trachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant future
Re: Honda Toughness: Your experiences...

i have the 06. i love mine. i havent stunted it really but i commute on it and love it. i ride it every chance i get.

1000RR.net is a good forum for it. lots of used parts on there. look me up if u join. u just have to be really nice on there. no SL assholiness allowed and u gotta read and abide by their shitty rules or they'll ban u. great site otherwise.
Old 04-30-2008 | 03:28 PM
  #5  
OneWheelw's Avatar
Registered User
 
Joined: Jul 2006
Posts: 147
From: new jersey
OneWheelw is an unknown quantity at this point
Re: Honda Toughness: Your experiences...

keep up wit the maintence and it'll be fine..
Old 04-30-2008 | 03:40 PM
  #6  
cbaquol's Avatar
Registered User
 
Joined: Dec 2007
Posts: 290
From: B-MORE/tampa
cbaquol is a decent person
Re: Honda Toughness: Your experiences...

my buddy HAD an 07 1000rr and was doing a highchair when the rod shot out the block. and this kid works at a honda shop and does his work on his bike himself, so it was def done right. he hasnt got a chance to tear down his motor yet so he doesnt know what caused it, but ill post up what it was when he tells me. and my 954 has been giving me issues the last month or so but other than those 2 issues i can pretty much say that hondas are bulletproof and i think alot of people agree with me. like a 636 cant handle the abuse of bein dropped over and over and over like the f4is can. but since ive never owned a 636 thats just from what ive seen and heard. let us know how you like the 1000rr when you get it.
Old 04-30-2008 | 04:23 PM
  #7  
PRIGonewheelup's Avatar
Registered User
 
Joined: Apr 2008
Posts: 5
From: stl MO
PRIGonewheelup is a decent person
Re: Honda Toughness: Your experiences...

all ive ever had is hondas. an f4i, and rc51, and now a 954, also a few cr 250's and the only problem ive ever had is the fork seals on the rc51, i know that im probably just lucky but the hondas really are bulletproof. oh i do have some valve chatter on the 954, but thats from hours of rev limiter abuse.
Old 04-30-2008 | 05:07 PM
  #8  
Crose's Avatar
Registered User
 
Joined: Aug 2007
Posts: 61
From: Canton, OH, US
Crose is a decent person
Re: Honda Toughness: Your experiences...

shims are overrated
Old 04-30-2008 | 05:12 PM
  #9  
Kaneone's Avatar
Wheelie Ninja!
 
Joined: May 2004
Posts: 4,755
From: Las Vegas NV
Kaneone is a decent person
Re: Honda Toughness: Your experiences...

my buddy just bought an 08 cbr 1000 (yellow n black) it has 600 miles on it...
its going into the shop today cause its motor is making more noise than the one i blew on my zx6r last week.. i think it already spun a bearing..


-kane
Old 04-30-2008 | 05:16 PM
  #10  
y2kmk's Avatar
Registered User
 
Joined: Mar 2004
Posts: 971
From: texas or vegas... hell i dont know.
y2kmk is an unknown quantity at this point
Re: Honda Toughness: Your experiences...

kane - clutch side? after i changed to Repsol oil (at like 17k) in my 04 600rr, the motherfuckng clutch basket started whining and grumbling.. ******* ***.

every other honda i've ever seen is tough as nails.
Old 04-30-2008 | 05:21 PM
  #11  
TheRomanSF415x's Avatar
$$$$$$$
 
Joined: Dec 2004
Posts: 10,568
From: San Francisco, CA
TheRomanSF415x is a jewel in the roughTheRomanSF415x is a jewel in the roughTheRomanSF415x is a jewel in the roughTheRomanSF415x is a jewel in the rough
Re: Honda Toughness: Your experiences...

hondas treated me nice..
the only exception i would make is for a GSXR1k 03-05 or a R1 06-08.

the 08 red/whtie R1 is just to sick
Old 04-30-2008 | 09:03 PM
  #12  
bikerboy's Avatar
Thread Starter
I Have Too Much Free Time
 
Joined: Jul 2003
Posts: 10,265
From: San Diego, Ca
bikerboy has a spectacular aura aboutbikerboy has a spectacular aura about
Re: Honda Toughness: Your experiences...

Originally Posted by cbaquol
my buddy HAD an 07 1000rr and was doing a highchair when the rod shot out the block. and this kid works at a honda shop and does his work on his bike himself, so it was def done right. he hasnt got a chance to tear down his motor yet so he doesnt know what caused it, but ill post up what it was when he tells me. and my 954 has been giving me issues the last month or so but other than those 2 issues i can pretty much say that hondas are bulletproof and i think alot of people agree with me. like a 636 cant handle the abuse of bein dropped over and over and over like the f4is can. but since ive never owned a 636 thats just from what ive seen and heard. let us know how you like the 1000rr when you get it.

wow. It seems like everyones stories are fairly similar. The older bikes are just tougher.


So if I were to wheelie it for a while from time to time it'd throw a rod or crap out?

My 04 gix 1000 was tough as nails I guess.


I was thinking about modding it but after looking at how much its going to cost, screw that. If I get the exhaust, I ned the full, then a power comander III, then clutch and bake levers, etc. Man, this will run $1000's.....

I'll ride this bitch stock.... Anybody know the difference between a full exhaust w/ power comm. plus K&N filter and a stock? Prob not a whole hell of a lot I am guesing as they already have fairly free flow....
Old 04-30-2008 | 10:09 PM
  #13  
Kaneone's Avatar
Wheelie Ninja!
 
Joined: May 2004
Posts: 4,755
From: Las Vegas NV
Kaneone is a decent person
Re: Honda Toughness: Your experiences...

Originally Posted by Kaneone
my buddy just bought an 08 cbr 1000 (yellow n black) it has 600 miles on it...
its going into the shop today cause its motor is making more noise than the one i blew on my zx6r last week.. i think it already spun a bearing..


-kane
just got back from the dealership with my friend, and yep. spun a bearing... just under 700 miles on it..

tsk tsk tsk..

should have bought a kawasaki!

-kane
Old 05-01-2008 | 03:42 AM
  #14  
bikerboy's Avatar
Thread Starter
I Have Too Much Free Time
 
Joined: Jul 2003
Posts: 10,265
From: San Diego, Ca
bikerboy has a spectacular aura aboutbikerboy has a spectacular aura about
Re: Honda Toughness: Your experiences...

Originally Posted by Kaneone
just got back from the dealership with my friend, and yep. spun a bearing... just under 700 miles on it..

tsk tsk tsk..

should have bought a kawasaki!

-kane


Haven't handed him the money yet..... haha...

I just ddidn't think they were that weak. Actually, they didnt change it much from 04 in terms of motor I don't think.... I know from o6-07 they gave the 07 a new swingarm, and dropped it 15lbs.

Last edited by bikerboy; 05-01-2008 at 03:47 AM.
Old 05-01-2008 | 04:57 AM
  #15  
gsxr"d's Avatar
Registered User
 
Joined: Jan 2007
Posts: 147
From: doesn't matter I'm moving
gsxr"d is a decent person
Re: Honda Toughness: Your experiences...

Originally Posted by Kaneone
just got back from the dealership with my friend, and yep. spun a bearing... just under 700 miles on it..

tsk tsk tsk..

should have bought a kawasaki!

-kane
If the motors gonna spring a leak it'll be in the first stages of getting run in. I had a mate with the bulletproof 06 R1 actually had a valve fracture. I still wouldn't buy a kwakka over a honda or yammy. No disrespect!
Old 05-01-2008 | 06:50 AM
  #16  
David D's Avatar
Registered User
 
Joined: Nov 2006
Posts: 957
From: 845 bitches
David D is an unknown quantity at this point
Re: Honda Toughness: Your experiences...

once i ran over some glass in a parking lot in my c r v..... and did not get a flat tire....hondas are tough...no joke...thats just my experience..
Old 05-01-2008 | 09:50 AM
  #17  
crazy636stunter's Avatar
Registered User
 
Joined: Dec 2006
Posts: 1,147
From: terre haute indiana usa
crazy636stunter is a decent person
Re: Honda Toughness: Your experiences...

Originally Posted by Kaneone
my buddy just bought an 08 cbr 1000 (yellow n black) it has 600 miles on it...
its going into the shop today cause its motor is making more noise than the one i blew on my zx6r last week.. i think it already spun a bearing..


-kane

the 08 cbr 1000 is damn ugly! im not sure which is worse, the cbr, or the new zx10.
Old 05-01-2008 | 10:14 AM
  #18  
Trachito's Avatar
Registered User
 
Joined: Feb 2006
Posts: 23,446
From: down souf
Trachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant future
Re: Honda Toughness: Your experiences...

Originally Posted by bikerboy
Haven't handed him the money yet..... haha...

I just ddidn't think they were that weak. Actually, they didnt change it much from 04 in terms of motor I don't think.... I know from o6-07 they gave the 07 a new swingarm, and dropped it 15lbs.
they aren't that weak. the guy prolly got a lemon. u really think the majority of 08 cbr's are gonna blow a motor in less than 1000 miles? it wheelies fine, man. just buy the ****. u'll love it. i wheelie mine from time to time and ride the **** out of it. any day it doesn't rain, i'm on it. the 07 is different than the 08 anyway.
Old 05-01-2008 | 10:15 AM
  #19  
Trachito's Avatar
Registered User
 
Joined: Feb 2006
Posts: 23,446
From: down souf
Trachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant futureTrachito has a brilliant future
Re: Honda Toughness: Your experiences...

Originally Posted by crazy636stunter
the 08 cbr 1000 is damn ugly! im not sure which is worse, the cbr, or the new zx10.
**** that, i'm not a fan of the new cbr's looks but i'll take it over the praying mantis any day.
Old 05-01-2008 | 02:40 PM
  #20  
j.evans187's Avatar
Registered User
 
Joined: Apr 2008
Posts: 24
From: Kansas City
j.evans187 is a decent person
Re: Honda Toughness: Your experiences...

along this topic line, The 04 cbr600rr, how do you guys feel about its durability. Its strength and weaknesses? oh and a bike with 26xxx miles on it, how many miles can a bike go before i need to worry about the milage.


Quick Reply: Honda Toughness: Your experiences...



All times are GMT -4. The time now is 09:22 PM.