pixel 6

Trying to get a longer Idle adjust cable for my 929. What are my options?

pixel 6

Bumpage....

samurai87

900rr idle screw.....its what I put on my 600rr

chadnine

you need an f2 idle adjuster that will do it.

samurai87

I thought the 900rr cable was longer...but idk

chadnine

The F2 Cable Is About 3-4 Inches Longer. I Have Mine In The Front Of The Throttle Body, It Sticks Right Out In Front Of My Tank......easy Acccess.

samurai87

cool maybe I'll switch mine to a f2 cable then...

T'RIC'KY

900RR cable is too short for the 929/954RR, use an F2/F3 cable, they are very long and work great, run it along the throttle cables to the right front of the tank, make sure to put grease on the thread before you screw it in

JFULLGSXR750

are you sure the 900rr cable is too short?? i just ordered 1 and from the looks of the diagram they appear to be the same

T'RIC'KY

Itīs def too short to stick it out in front of the tank, if you run a full fairing bike it wonīt work, on a naked bike you can route it to the side maybe.

I tried a 900rr cable first and had to realize itīs too short, switched to an F3 cable and itīs all fine!

JFULLGSXR750

im still gonna try it anyway....if not i guess ill b ordering my 3rd idle cable

Raf

^^ you have the coolest avatar ever.

pixel 6

Right on guys. I'll be tracking one down this week =)

T'RIC'KY

bwahahah same here, I also went through 3 cables, btw R6 cables are long as hell but the thread is different than on Hondas