Will an 07' gsxr 600 exhaust fit on an f4i ?
#1
Will an 07' gsxr 600 exhaust fit on an f4i ?
It will w/ a couple careful cuts and tweaks :YEAH
I've just gotta bend the hanger bracket and get it mounted to the heel guard bolts.
Tried it out tonight... sounds sweeeeeeeet :YEAH :YEAH :YEAH
I've just gotta bend the hanger bracket and get it mounted to the heel guard bolts.
Tried it out tonight... sounds sweeeeeeeet :YEAH :YEAH :YEAH
#3
Re: Will an 07' gsxr 600 exhaust fit on an f4i ?
Low end is same as my old 2bros and Jardine shorty....
I had to cut a couple inches off the connector pipe that comes w/ the slip-on...
It's just a lil stainless elbow about 6in long... ya gotta cut it down to about 3" (or what ever works for you) then clamp it up.
I just eyeballed it and shoved it on there..... Funny feeling you get cutting into a brand new $475 micron
#6
Re: Will an 07' gsxr 600 exhaust fit on an f4i ?
Low end is same as my old 2bros and Jardine shorty....
I had to cut a couple inches off the connector pipe that comes w/ the slip-on...
It's just a lil stainless elbow about 6in long... ya gotta cut it down to about 3" (or what ever works for you) then clamp it up.
I just eyeballed it and shoved it on there..... Funny feeling you get cutting into a brand new $475 micron
I had to cut a couple inches off the connector pipe that comes w/ the slip-on...
It's just a lil stainless elbow about 6in long... ya gotta cut it down to about 3" (or what ever works for you) then clamp it up.
I just eyeballed it and shoved it on there..... Funny feeling you get cutting into a brand new $475 micron
#8
Re: Will an 07' gsxr 600 exhaust fit on an f4i ?
nice... i guess i am not the only person to do that micron mod... it sounds sick... i put mine on a 08 zx6r... just to look a little different and make room for a round bar... but i used a 07 r6 micron gp exhaust cause it is about 5 inches shorter then the gsxr... i had the exhaust hanger tab cut and re welded do i could mount the exhaunt to the bolt on the back of the rearset just like a 07 r6... ***** pimp... i never took pictures yet but i will if it will help out
Those hydro-formed micron gp's are sooooo ******* sweet looking... I saw one real quick on a gsxr1000 and remembered someone put a stock 1000 can on an f4i.... I figured **** IT!! I'll buy one and make it work!!
And it worked rather easy I must say.... bout 15min worth of cutting and fitting and it was done.
It's kind nice having a different looking exhaust pipe on the old f4ugly.... now I can show off my fancy wavy rotor
#9
#10
Re: Will an 07' gsxr 600 exhaust fit on an f4i ?
Low end is same as my old 2bros and Jardine shorty....
I had to cut a couple inches off the connector pipe that comes w/ the slip-on...
It's just a lil stainless elbow about 6in long... ya gotta cut it down to about 3" (or what ever works for you) then clamp it up.
I just eyeballed it and shoved it on there..... Funny feeling you get cutting into a brand new $475 micron
I had to cut a couple inches off the connector pipe that comes w/ the slip-on...
It's just a lil stainless elbow about 6in long... ya gotta cut it down to about 3" (or what ever works for you) then clamp it up.
I just eyeballed it and shoved it on there..... Funny feeling you get cutting into a brand new $475 micron
thats definatley pimp **** right there, bike looks good too,I love the stock looking sleeper stunt bike
#12
Re: Will an 07' gsxr 600 exhaust fit on an f4i ?
No ****? I was wondering if I should cut the hanger tab and get it welded but I didn't want to **** up the nice pretty can just yet...
Those hydro-formed micron gp's are sooooo ******* sweet looking... I saw one real quick on a gsxr1000 and remembered someone put a stock 1000 can on an f4i.... I figured **** IT!! I'll buy one and make it work!!
And it worked rather easy I must say.... bout 15min worth of cutting and fitting and it was done.
It's kind nice having a different looking exhaust pipe on the old f4ugly.... now I can show off my fancy wavy rotor
Those hydro-formed micron gp's are sooooo ******* sweet looking... I saw one real quick on a gsxr1000 and remembered someone put a stock 1000 can on an f4i.... I figured **** IT!! I'll buy one and make it work!!
And it worked rather easy I must say.... bout 15min worth of cutting and fitting and it was done.
It's kind nice having a different looking exhaust pipe on the old f4ugly.... now I can show off my fancy wavy rotor
#13
#15
Re: Will an 07' gsxr 600 exhaust fit on an f4i ?
same thing use to happen to me...so i went and bought a extra socket and ground down the outside of the socket just a tad...and it never stuck again... it took about 10 minutes on a grinding wheel...and the socket was only like 3 bucks
#16
Re: Will an 07' gsxr 600 exhaust fit on an f4i ?
You ain't shittin... micron has always had a very distintive sound... nice low growl on idle w/ a howling scream up top.
Not a great pipe for night time lot sessions, but this is my street/daytime/show killer :YEAH Did a couple ss rev limit coasters tonight and holy **** it makes your brain itchy if your close enough.
Take some pics man... my mind is working here thinking about what you did... I wanna see!! I wanna see!!!
#17
Re: Will an 07' gsxr 600 exhaust fit on an f4i ?
You ain't shittin... micron has always had a very distintive sound... nice low growl on idle w/ a howling scream up top.
Not a great pipe for night time lot sessions, but this is my street/daytime/show killer :YEAH Did a couple ss rev limit coasters tonight and holy **** it makes your brain itchy if your close enough.
Take some pics man... my mind is working here thinking about what you did... I wanna see!! I wanna see!!!
Not a great pipe for night time lot sessions, but this is my street/daytime/show killer :YEAH Did a couple ss rev limit coasters tonight and holy **** it makes your brain itchy if your close enough.
Take some pics man... my mind is working here thinking about what you did... I wanna see!! I wanna see!!!
Last edited by BISHOP PHILLIPS; 04-03-2008 at 11:54 PM.
#19
Re: Will an 07' gsxr 600 exhaust fit on an f4i ?
got you bro... i will take a bike when i go up to the shop with my iphone... it is getting painted and the frame/subframe is getting reinforced ... so it can be ready for myrtle beach bike week... if you come down we will be at redline powersports where britton and his boyz will be at ... i got a booth out there and both my wheelie machines... you also hit it on the head bro ...the exhaust sounds awesome low..and like a gp bike in high revs... it gives me chills also... but like you said at night at the lot it blows.... but we got a spot were we pay 30 bucks a month a piece and get 24 hr access.... no residential around.
You need to take the washer that goes behind the axle nut and stack 2 of them on the INSIDE of the caliper bracket, between the bracket and the wheel spacer. **on edit: Sorry it's been a while and my memory is foggy.
The odd bearing you use is a **** hair (1 or 2mm) THICKER than stock.... and the f4i spacer on the brake side is a lil narrower than the stock 600rr... so the washers off set the difference and let the calipers/pads line up correctly.
It's pretty easy.... and again, looks a lil better than the stock f4ugly!
Last edited by kj; 04-03-2008 at 11:59 PM.
#20
Re: Will an 07' gsxr 600 exhaust fit on an f4i ?
here is the first exhaust i had... but it was loud as all get out... that thing sounded like a nascar of indy car or some ****... it was super loud and ear ringing... so i sold it and got the micron... here is a pic on how it mounts to the foot peg... i forgot to mention i ordered a broken rearset off a 07 r6 on ebay...and cut of the exhaust mounting tag and had it welded to my wood craft rearsets... but here is a pic to give you a idea of the mounting points off a r6