New Member needs some help

Thread Tools
 
Search this Thread
 
Old 03-01-2008 | 12:01 PM
  #21  
Afflicted's Avatar
Registered User
 
Joined: Sep 2006
Posts: 1,249
From: Atlanta
Afflicted is an unknown quantity at this point
Re: New Member needs some help

Originally Posted by JustaGixxerNoob
really i didnt know r1z are hard to wheelie.. my buddy as a r1 and he does highchairs on the thing
holy ****, are you cerial? this guys post was worse then the guy who started the thread, you really are a ******* noob

Old 03-01-2008 | 01:23 PM
  #22  
michel's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 13
From: Beirut - Lebanon
michel is a decent person
Re: New Member needs some help

Originally Posted by Standupnfall
An R1 will come up in just about any gear. My bike has about 60% of the power your R1 has and I only use about 60% of it to get the fromnt up. Get a dirtbike and practice. Read the WHEELIE STICKY (many times, pay attention). Be careful that thing is a beast.

How fast are you going?
what gear are you in?
Whats your experience level?
give us more info/ specific questions and youll get better answers
I weigh 210lbs and I ride a stock 07 R1. I am quite an experienced and fast rider but not a stunter. My 03 R1 would lift the front in first when I used to ride it aggressively.

I read the how to on this site and on the R1 forum and I basically tried to do a wheelie while sitting towards the back of the bike. I tried riding in first gear until 10,000 rpm and then open it all up (it just raced forward) I tried double clutching and it LEAPED forward. Maybe I'm too heavy or maybe I am instinctically trying to keep it down as I would during fast road ridding.

The feeling I have is that it is too long and the balance is really low and forward. This is a great handling bike but maybe not made for wheelies.

Thanks for your help.

Michel
Old 03-01-2008 | 01:29 PM
  #23  
michel's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 13
From: Beirut - Lebanon
michel is a decent person
Re: New Member needs some help

Originally Posted by Afflicted
holy ****, are you cerial? this guys post was worse then the guy who started the thread, you really are a ******* noob

You guys obviously have a serious attitude issue. Suffice to say that I will certainly mop the floor with your sorry A**es on track or on open roads, take my word for it. The point of someone asking a question is getting some serious answer and not a couple of teen age ******* trying to impress with obnoxious comments.
Old 03-01-2008 | 01:54 PM
  #24  
i23theone23i's Avatar
Registered User
 
Joined: Feb 2008
Posts: 332
From: Miami
i23theone23i is a decent person
Re: New Member needs some help

Originally Posted by michel
You guys obviously have a serious attitude issue. Suffice to say that I will certainly mop the floor with your sorry A**es on track or on open roads, take my word for it. The point of someone asking a question is getting some serious answer and not a couple of teen age ******* trying to impress with obnoxious comments.

LOL I love when people get mad...Don't take them serious man, it's kind of like a ritual here to rip on someone. No fence but if you can't take a few jokes then how will you take the hit once your bike trows you off? R1 are very easy to pick up by the way.
Old 03-01-2008 | 02:00 PM
  #25  
Afflicted's Avatar
Registered User
 
Joined: Sep 2006
Posts: 1,249
From: Atlanta
Afflicted is an unknown quantity at this point
Re: New Member needs some help

Originally Posted by michel
You guys obviously have a serious attitude issue. Suffice to say that I will certainly mop the floor with your sorry A**es on track or on open roads, take my word for it. The point of someone asking a question is getting some serious answer and not a couple of teen age ******* trying to impress with obnoxious comments.
come on down to GA and ill show you whats up

plus maybe if you WOULD ******* READ AND JUST TRY IT instead of sitting behind a computer and being like im a ****** retarded that wants to stunt my r1 with power wheelies, your the first ****** i have hated on this whole forum. your comments are way more obnoxious then mine because your squidly *** should go out and practice and not be scared to ******* crash your bike

so hit me up when you wanna come down to georgia and mop the floor/streets with my a**
grown *** man still bleepin out his words, this isnt mammas house bitch you gonna get slapped

and why would i take your word for anything over the internet? i dont know you for ****


edit **** hes in lebanon lol doubt he will drop by for a visit

Last edited by Afflicted; 03-01-2008 at 02:02 PM.
Old 03-01-2008 | 02:03 PM
  #26  
michel's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 13
From: Beirut - Lebanon
michel is a decent person
Re: New Member needs some help

Originally Posted by i23theone23i
LOL I love when people get mad...Don't take them serious man, it's kind of like a ritual here to rip on someone. No fence but if you can't take a few jokes then how will you take the hit once your bike trows you off? R1 are very easy to pick up by the way.
Who said I was mad?
Old 03-01-2008 | 02:05 PM
  #27  
Afflicted's Avatar
Registered User
 
Joined: Sep 2006
Posts: 1,249
From: Atlanta
Afflicted is an unknown quantity at this point
Re: New Member needs some help

and you know what i just realized I WASN'T EVEN MAKING FUN OF YOU BUT YOU TOOK OFFENSE TO IT

you obviously are the one who are lacking skill since you got so defensive so quick
Old 03-01-2008 | 02:09 PM
  #28  
i23theone23i's Avatar
Registered User
 
Joined: Feb 2008
Posts: 332
From: Miami
i23theone23i is a decent person
Re: New Member needs some help

Originally Posted by Afflicted
come on down to GA and ill show you whats up

plus maybe if you WOULD ******* READ AND JUST TRY IT instead of sitting behind a computer and being like im a ****** retarded that wants to stunt my r1 with power wheelies, your the first ****** i have hated on this whole forum. your comments are way more obnoxious then mine because your squidly *** should go out and practice and not be scared to ******* crash your bike

so hit me up when you wanna come down to georgia and mop the floor/streets with my a**
grown *** man still bleepin out his words, this isnt mammas house bitch you gonna get slapped

and why would i take your word for anything over the internet? i dont know you for ****


edit **** hes in lebanon lol doubt he will drop by for a visit
Old 03-01-2008 | 02:25 PM
  #29  
fat_sac's Avatar
Registered User
 
Joined: Sep 2005
Posts: 921
From: H Town
fat_sac has a little shameless behaviour in the past
Re: New Member needs some help

Originally Posted by i23theone23i
+1 haha This thread really went well for dude who's obviously been riding his R1 long enough to know it can't wheelie? wtf mate?
Old 03-01-2008 | 02:31 PM
  #30  
FREDERATOR's Avatar
Registered User
 
Joined: Jun 2007
Posts: 666
From: gaqsport, new york
FREDERATOR is a decent person
Re: New Member needs some help

hey man you will learn alot from this forum, bu you got to get through alot of bullshit first. I just want to give you props for not put a thread asking howto do, instead you asked for the link. alot of people want to yell squid because deep down there fearful of being a squid, its like squidafobia around here. but if you got Q&A just do a search and if you get no result then ask !!! welcome and have fun
Old 03-01-2008 | 02:40 PM
  #31  
fat_sac's Avatar
Registered User
 
Joined: Sep 2005
Posts: 921
From: H Town
fat_sac has a little shameless behaviour in the past
Re: New Member needs some help

Originally Posted by michel
You guys obviously have serious skills. Suffice to say that I am the greatest R1 rider to ever live but I don't have enough throttle or clutch control to ride a god damn wheelie , take my word for it. The point of someone asking a question is getting a serious answer and I understand that I didn't impress you with my obnoxious comments.
Fixed it for you.:YEAH
Old 03-01-2008 | 02:59 PM
  #32  
Gulfripper's Avatar
Registered User
 
Joined: Mar 2008
Posts: 274
From: port richey, fl, usa
Gulfripper is a decent person
Re: New Member needs some help

Im riding an 08 R1 and will tell you it is easy as hell to get up. Im slipping the clutch but going staggerd in 2nd if you bounce you can do it a 35 and up. It has some low end lag but if you bounce it, it will come up. The only problem is balance point on this bike is insane. I am allways speeding up on matter what but im a sissy and wont take it all the way back. BTW Im running stock gearing and it clutches up better than my old r6 with -1 +2.
Also look into a f4I throttle tube and practice. And if your slipping the clutch and all it does is lung your timing is off.
Old 03-01-2008 | 03:16 PM
  #33  
i23theone23i's Avatar
Registered User
 
Joined: Feb 2008
Posts: 332
From: Miami
i23theone23i is a decent person
Re: New Member needs some help

Originally Posted by fat_sac
Fixed it for you.:YEAH
Nicely done LOL
Old 03-01-2008 | 03:45 PM
  #34  
michel's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 13
From: Beirut - Lebanon
michel is a decent person
Re: New Member needs some help

Originally Posted by just stuntin
hey man you will learn alot from this forum, bu you got to get through alot of bullshit first. I just want to give you props for not put a thread asking howto do, instead you asked for the link. alot of people want to yell squid because deep down there fearful of being a squid, its like squidafobia around here. but if you got Q&A just do a search and if you get no result then ask !!! welcome and have fun
Thanks. I know the drill I just don't like it, its moronistic and not very constructive. I did start with a search but the threads did not deal with the 07 specifically so I asked and truth be told there are enough sane people on this site that might help get me get there.

Michel
Old 03-01-2008 | 03:48 PM
  #35  
michel's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 13
From: Beirut - Lebanon
michel is a decent person
Re: New Member needs some help

Originally Posted by Gulfripper
Im riding an 08 R1 and will tell you it is easy as hell to get up. Im slipping the clutch but going staggerd in 2nd if you bounce you can do it a 35 and up. It has some low end lag but if you bounce it, it will come up. The only problem is balance point on this bike is insane. I am allways speeding up on matter what but im a sissy and wont take it all the way back. BTW Im running stock gearing and it clutches up better than my old r6 with -1 +2.
Also look into a f4I throttle tube and practice. And if your slipping the clutch and all it does is lung your timing is off.
I'll try bouncing it and getting the timing right. Will keep you posted on developments.
Old 03-01-2008 | 03:53 PM
  #36  
michel's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 13
From: Beirut - Lebanon
michel is a decent person
Re: New Member needs some help

Originally Posted by Afflicted
and you know what i just realized I WASN'T EVEN MAKING FUN OF YOU BUT YOU TOOK OFFENSE TO IT

you obviously are the one who are lacking skill since you got so defensive so quick
And who said I thought you were making fun of me?
Old 03-01-2008 | 03:56 PM
  #37  
michel's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 13
From: Beirut - Lebanon
michel is a decent person
Re: New Member needs some help

Originally Posted by Afflicted
come on down to GA and ill show you whats up

plus maybe if you WOULD ******* READ AND JUST TRY IT instead of sitting behind a computer and being like im a ****** retarded that wants to stunt my r1 with power wheelies, your the first ****** i have hated on this whole forum. your comments are way more obnoxious then mine because your squidly *** should go out and practice and not be scared to ******* crash your bike

so hit me up when you wanna come down to georgia and mop the floor/streets with my a**
grown *** man still bleepin out his words, this isnt mammas house bitch you gonna get slapped

and why would i take your word for anything over the internet? i dont know you for ****


edit **** hes in lebanon lol doubt he will drop by for a visit
I'm also a Canuck and last time we paid you a visit we burned the White House and it took a tornado to get us out of there.

You sure you want me to come down and pay you a visit woos?
Old 03-01-2008 | 03:57 PM
  #38  
i23theone23i's Avatar
Registered User
 
Joined: Feb 2008
Posts: 332
From: Miami
i23theone23i is a decent person
Re: New Member needs some help

Originally Posted by michel
I'll try bouncing it and getting the timing right. Will keep you posted on developments.
Stand up,Put your left leg on passanger peg, right leg keep it on yours to cover the break and if you dump the clutch you should have no problem picking that bike up in most gears.
Old 03-01-2008 | 03:57 PM
  #39  
michel's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 13
From: Beirut - Lebanon
michel is a decent person
Re: New Member needs some help

Originally Posted by fat_sac
+1 haha This thread really went well for dude who's obviously been riding his R1 long enough to know it can't wheelie? wtf mate?
Now try thinking real hard (try is the key word here) and draw your own conclusion.
Old 03-01-2008 | 04:02 PM
  #40  
michel's Avatar
Thread Starter
Registered User
 
Joined: Feb 2008
Posts: 13
From: Beirut - Lebanon
michel is a decent person
Re: New Member needs some help

Originally Posted by i23theone23i
Stand up,Put your left leg on passanger peg, right leg keep it on yours to cover the break and if you dump the clutch you should have no problem picking that bike up in most gears.
I was trying to avoid starting with stand up wheelies as I find I have less control on the bike. i use to get the 03 up sitting down but I guess maybe I have to take that route with the 07.


Quick Reply: New Member needs some help



All times are GMT -4. The time now is 01:39 AM.