Any ideas on how to re route the oil lines on my r6 so the oil wont flow into the heads when its up on one??? its a 2005 R6. any one else have this problem???

 

just bypass the air box and let it run straight to the exhaust ports so it won't get in the combustion chamber

 

And you do that how????

 

You need to lower your oil level. I have a 05 r6 and i run about a 1/4 of a quart over. Also i have hydrolocked my motor and r6's have weak rods, so chances are if you have locked it up, it will blow up soon in the near future.

 

ya my buddy has that exact prob with the r6 the thing is sweet for spreaders and high chairs but as soon as u put at 12 it locks up the thing is week for a stunt bike.

 

there is a crankcase vent tube that runs from the crankcase to the air box and there is a another hose that runs from your pair valve[clean air valve] to your air box ,bypass the air box and connect the two hoses together then disable the pair valve by unplugging and blocking off the vaccum line that actuates the pair valve..

also block off the two holes in your airbox where the two hoses you connected use to go....

this will route any oil that gets pumped out of the crankcase vent tube directly to your exhaust port via reed valves that are mounted in your valve cover, i know this will look like it just puts it back in the engine but it doesn't the read valves are ported to you exhaust port .....

 

that doesn't make sense


good explanation OMR, i recently did this on my gsxr. i now notice a small difference in my idle. (stronger pull)

 

i think it spells it out pretty god too but usually when i tell this to some one it turns into 48 private messages..

 

PM sent

 

dont know why you would say some lies like that....

 

I love my r6 as a stunt bike. it rides good and straight. fun as hell too. but my buddies locked so i am trying to prevent it. thanks alot for you help.

 

Is there anything anyone can recommend from hurting it motor wise???

 

go to help n how to section and they have pictures and directrions of how to do the clean air mod

 

yalll some hydrolocking motha fvckers lol

 

hey i went and looked and didn't see nothing. how far back is it in the pages??? i even searched clean air mod and nothing.

 

really though whered that guy get that!

 

it's 'kleen air mod'.

It's sticky in the how to section.

 

https://www.stuntlife.com/forums/444...ro-locked.html

in that thread couple post down is all detailed instructions for it.

 

thanks dude that helped now i just gotta do it haha.