HoHey brackets for 4 piston caliper
03-05-2008, 10:50 PM
#101
Registered User
Thread Starter
Join Date: Aug 2003
Location: On Land or Water!
Age: 52
Posts: 2,465
Re: HoHey brackets for 4 piston caliper
i think you misunderstood me... but whatever, it's cool... I know what your talking about.
Different setups for different tastes..... Myself, I like the single piston, dual caliper setup... the 4 piston was a little too much for me.
I like to hold onto the clipon a little bit w/ my brake finger on the brake lever... so the increased power would always bring the front end down when I didn't want it to.
I think it's very cool that we have all these different options these days to tweak our hb's to exactly the way we want them... more/new options = more/new better riders.
Different setups for different tastes..... Myself, I like the single piston, dual caliper setup... the 4 piston was a little too much for me.
I like to hold onto the clipon a little bit w/ my brake finger on the brake lever... so the increased power would always bring the front end down when I didn't want it to.
I think it's very cool that we have all these different options these days to tweak our hb's to exactly the way we want them... more/new options = more/new better riders.
I Know what you are talking about! I Used to always control the brake with my body weight as well..Well You know what I mean! Same with Ernie but if you could manage to hold on to the Clip ons without doing the Kinda Mashing the Hand Brake, It works So damn good retarded.
I Did the same you are talking about with it B4, I Hated to much power! Its kinda Different now! Anyways, YES......The More options for our HandBrakes the Merrier!
03-05-2008, 11:53 PM
#103
Registered User
Thread Starter
Join Date: Aug 2003
Location: On Land or Water!
Age: 52
Posts: 2,465
03-05-2008, 11:59 PM
#104
Registered User
Join Date: Dec 2002
Location: California
Age: 45
Posts: 316
03-06-2008, 12:16 AM
#105
"Keep Your F4i's IDIOTS"
Join Date: Apr 2007
Location: deep dirty south Illinois you fucks not missouri
Age: 41
Posts: 3,914
Re: HoHey brackets for 4 piston caliper
Ernie & I are working on the "BEST" Ultimate Hand Brake System.
It is a combination of FullThrotleInc's Setup with HoHey's Setup.
You want the Best of Both worlds you have it! Existing Full Throtle Fans & Believers, as well as HoHey's Fans & Believers get the Best of the Best!
Just look at it this way..... Jorge's "HoHey's" Parts in conjuction with Bill's Parts will give you Absolutely THE BEST HandBrake Setup ever Imagined!
Both Combined will Give you a 2 Caliper (5 Pistons total) for Hand Brake & Single Caliper 1 piston Stock for your Foot Brake. When one thinks that things could not get better than Jorge's 4 Piston Caliper Setup.....It Did. Just add Bill to the Combination!
Pics & Illustrations coming soon! :YEAH :YEAH :YEAH
It is a combination of FullThrotleInc's Setup with HoHey's Setup.
You want the Best of Both worlds you have it! Existing Full Throtle Fans & Believers, as well as HoHey's Fans & Believers get the Best of the Best!
Just look at it this way..... Jorge's "HoHey's" Parts in conjuction with Bill's Parts will give you Absolutely THE BEST HandBrake Setup ever Imagined!
Both Combined will Give you a 2 Caliper (5 Pistons total) for Hand Brake & Single Caliper 1 piston Stock for your Foot Brake. When one thinks that things could not get better than Jorge's 4 Piston Caliper Setup.....It Did. Just add Bill to the Combination!
Pics & Illustrations coming soon! :YEAH :YEAH :YEAH
pics!!!!!! pics???? :YEAH this would be a pretty expensive handbreak setup though
03-06-2008, 03:57 AM
#107
WWW.Sickinnovations.com
Join Date: May 2004
Location: Usa
Posts: 18,228
Re: HoHey brackets for 4 piston caliper
03-06-2008, 09:59 AM
#108
Registered User
Join Date: Aug 2006
Location: MS & AL
Posts: 5,053
03-06-2008, 04:41 PM
#109
Registered User
Join Date: Jun 2006
Location: SoCal,usa
Posts: 118
Re: HoHey brackets for 4 piston caliper
I think in order to be sucessful with any idea it has to adapt to all forms if possible.. with that said you dont need to have them all stocked however just availble for sale..
Hohey doesnt make a bracket with the 4piston for the 06-up gixxers6 or the R6 and I think it is important to have all just because the name behind the product(relieablity,service,etc) all means more to buyers or a group then the company...
Ie.. how many fly by night stunt companies have there been... 1 billion..
Whatever happens dont just make stuff for the popular bikes make them for all...
Just my 2 cents..
Hohey doesnt make a bracket with the 4piston for the 06-up gixxers6 or the R6 and I think it is important to have all just because the name behind the product(relieablity,service,etc) all means more to buyers or a group then the company...
Ie.. how many fly by night stunt companies have there been... 1 billion..
Whatever happens dont just make stuff for the popular bikes make them for all...
Just my 2 cents..
03-06-2008, 08:32 PM
#110
Registered User
Join Date: Oct 2002
Posts: 1,651
Re: HoHey brackets for 4 piston caliper
I think in order to be sucessful with any idea it has to adapt to all forms if possible.. with that said you dont need to have them all stocked however just availble for sale..
Hohey doesnt make a bracket with the 4piston for the 06-up gixxers6 or the R6 and I think it is important to have all just because the name behind the product(relieablity,service,etc) all means more to buyers or a group then the company...
Ie.. how many fly by night stunt companies have there been... 1 billion..
Whatever happens dont just make stuff for the popular bikes make them for all...
Just my 2 cents..
Hohey doesnt make a bracket with the 4piston for the 06-up gixxers6 or the R6 and I think it is important to have all just because the name behind the product(relieablity,service,etc) all means more to buyers or a group then the company...
Ie.. how many fly by night stunt companies have there been... 1 billion..
Whatever happens dont just make stuff for the popular bikes make them for all...
Just my 2 cents..
To make a product for all the bike models would be unfeasible and high in costs.
Your list on what a product line should cover will differ from mine, Joe's, Jake's, etc....
03-07-2008, 06:31 AM
#111
WWW.Sickinnovations.com
Join Date: May 2004
Location: Usa
Posts: 18,228
Re: HoHey brackets for 4 piston caliper
i agree and you would loss your *** because your price would have to be so high to cover what you lose on products that don't sell. it is not cheap to get the first one cut
03-07-2008, 01:09 PM
#112
Registered User
Join Date: Jun 2006
Location: SoCal,usa
Posts: 118
Re: HoHey brackets for 4 piston caliper
i said have it availble for sale.. like be able to make one and sell it... because a lot of companies will only make cnc's programs for a popular model but that doesnt mean they cant make one for another bike thats all..
ability to offer something to everyone is important.. I dont mean have it on hand...
ability to offer something to everyone is important.. I dont mean have it on hand...
03-12-2008, 05:49 PM
#117
Registered User
Join Date: Jul 2003
Location: San Jose, CA
Age: 42
Posts: 329
Re: HoHey brackets for 4 piston caliper
So im thinkin of buyin the 4piston caliper setup, but had a question about trimming the pads? do i jes throw it on and ride it for a week and the trim the un-used pad down? or i dont necessarily need to trim it down?
(sorry for hijackin the thread, jes need info)
(sorry for hijackin the thread, jes need info)
03-12-2008, 05:54 PM
#118
"Keep Your F4i's IDIOTS"
Join Date: Apr 2007
Location: deep dirty south Illinois you fucks not missouri
Age: 41
Posts: 3,914
Re: HoHey brackets for 4 piston caliper
just throw it on and ride! i wouldnt even trim thre pads when they get close to toughing throw em away and replace em, you should be good as long as you look your bike over before and after you ride everytime
03-13-2008, 12:33 PM
#120
Registered User
Join Date: Sep 2007
Location: ATL
Posts: 560
Thread
Thread Starter
Forum
Replies
Last Post
