Cause Of my 12 bar I had to take the stock light out right. Well what is a good way to fabricate someting in there? I bought a light from autozone and didnt even thing about it having to be dual filliment. Would a blinker work if I put a red lense in it? If you got your hooked up throw up a pic for me to get some ideas. Getting time again for the old inspection.

 

BTW it is a round bar on my bike not the flat bar. cause I seen a lot of flatbar stock rears.

 

got a hai led strip taillight brand new 45 shipped, easy as **** to hook up and 6 inches long so you can mount almost anywhere, pm me if you want it......

 

I just did a tail light for someones F4I with a round bar. I'm assuming you have the battery tray trimmed down in the back. Autozone sells a stretched oval shape led light for $25. I just made some L shaped light steel brackets and srewed them on the back of the light with very short sheet metal screws(if they're to long you'll ruin the light) Then rivet the brackets to the battery tray/undertail. Cut off the factory plugs and wire it up. It turned out real sleek and concealed. The led lights look awesome. If I had the bike here I'd throw up a pic. Maybe I can tomorrow.

 

led is the best way to go, dont forget the resistor! I used a broken stock 05 gix light, took it apart and pulled out the led strip. Then I gutted my stock f4i light and mounted the strip inside.

 

I used a truck-lite mini LED Need something bright for those cars who don't pay attention to you are stopping.
http://www.truck-lite.com/webapp/wcs...8659&langId=-1

 

what size resistor 60ohm 1/2 watt??

 

I would like to see that cause I looked at autozone and o'rieleys and the only Brake lights they had here f'ing huge. I have the tail cut clean off in the back so I wanted to put something smallin there and fiberglass fab it in. I am going to go with led's cause If I put bulbs in it they are just gonna blow when I drop a stoppie.... my old 929 loved to do that. You all got some great advice . thanks

 

https://www.stuntlife.com/forums/2-s...ons-rocks.html

 

no round bar but still looks nice, 600rr led strip, got it for free :YEAH

 

Looks good but no price? And is it a three wire set up? Cause I need running light/ brake light.

 

just get an hai one problem fixed within 10 mins after you get it

 

Karl, just go to haibikeshop.com, they have the brakelight you need, ready to hook up, they also have the headlights you are looking for as well. Just an idea bro. And you gonna be ready to ride that thing next month?

 

well Got to re weld the 12 bar cause the welds broke in three spots, I am redoing the tank cause the bondo cracked gonna try some short strand fiberglass and see how that goes, ordered a new pilot power for the rear, streetfighter light is in the mail.gonna try and get her humpable soon but I might have to rock the 954 till I get the f4i straight. Gonna be a lot bike for awhile tho. Bout sick of getting in trouble and if you cant guess I am trying to get an overall Idea on how I want my bike to turn out starting with the tail. I am thinking of doing some fiberglass fab work on the tail should look good till I break it.

 

use the stock light just take a dremel to it. Just take your time and cut it right

 

Also not a roundbar but, I just flipped a 05 gsxr light and it mounted up nice under the 12 bar and is bright.

 

you want that light bro? if not im throwin it on one of my bikes. let me know thanks man

 

+1....My stock light worked out great after trimming it down

 

well I been thinking about it and I think I will try and put the stock light back on but have any of you guys tried those led bulbs that fit in the stock holes? Cause I am going to weld aluminum dimond plating to the bottom of my subframe and I dont want to have to be changing those bulbs out all the time..... Or should I just gut it like dude said below?

Another option I was looking at is putting an 05 GSXR light back there?

 

well this is what I ordered so I will let yall know if it is any good. It is also cheap. They have one that dont blink also.
http://www.customdynamics.com/videos...derz_video.htm