12 Bar Help
#2
Re: 12 Bar Help
why dont you try puting it on or read the direction before you go posting on stuntlife about it....
oh and did you say gsxr...i would worry about reinforcing your frame and subframe before you worry about a 12 bar thats probably not guan get scraped lol
oh and did you say gsxr...i would worry about reinforcing your frame and subframe before you worry about a 12 bar thats probably not guan get scraped lol
#3
Re: 12 Bar Help
awesome adivce except i already tried puttin it on and i am obviousley not gettin it right and sice powers is the crappiest company out i have no instructions to read
#4
Re: 12 Bar Help
get a dremel tool
tape all your plastic before you begin cutting
and just bolt it on...
i beleive the subframes are cast, and don't think you drill that year...
but i could be wrong. what clamps did it come with?
that should be a good sign of what you have to do....
tape all your plastic before you begin cutting
and just bolt it on...
i beleive the subframes are cast, and don't think you drill that year...
but i could be wrong. what clamps did it come with?
that should be a good sign of what you have to do....
#6
#10
Re: 12 Bar Help
yep... you have to drill and use their clamps unless the subframe has a preexisting hole or gap it lines up with.
if its cast first time you hit the 12 bar... better have another sub frame ready...
if its cast first time you hit the 12 bar... better have another sub frame ready...
#11
Re: 12 Bar Help
Are you cereal?
Get that ************ on there..
ANY WHICH WAY..
make it work!!
this aint lincoln log werx
if you cant clamp it.. bolt it..
Or do what i did
Build your own freakn subframe with a 12 bar on there..
weld weld weld my ninja
Get that ************ on there..
ANY WHICH WAY..
make it work!!
this aint lincoln log werx
if you cant clamp it.. bolt it..
Or do what i did
Build your own freakn subframe with a 12 bar on there..
weld weld weld my ninja
#12
Re: 12 Bar Help
shitt if i owened a welder id have alot less problems in life...i just got it on though, banged outta work so i can get it done cuz it was pissin me off, i ended up drilling a few new holes and bolting it on. for the record the bolts powers sends with it are also crap cuz i snapped 2 of them putting it on and im not a big guy.. heres how it came out all back 2gether
[ATTACH][ATTACH]
[/ATTACH][/ATTACH]
[ATTACH][ATTACH]
[/ATTACH][/ATTACH]
#13
Re: 12 Bar Help
shitt if i owened a welder id have alot less problems in life...i just got it on though, banged outta work so i can get it done cuz it was pissin me off, i ended up drilling a few new holes and bolting it on. for the record the bolts powers sends with it are also crap cuz i snapped 2 of them putting it on and im not a big guy.. heres how it came out all back 2gether
[ATTACH][ATTACH]
[/ATTACH][/ATTACH]
[ATTACH][ATTACH]
[/ATTACH][/ATTACH]
their bolts are crap? Lol, sounds like you over torqued them..
And I hate to say it, but it looks like its crooked lol.. It might not be though, but from the picture, the tail plastic is DEFINITELY at a different angle then your bar..
#14
Re: 12 Bar Help
Welder? Wtf does that have to do with anything?
their bolts are crap? Lol, sounds like you over torqued them..
And I hate to say it, but it looks like its crooked lol.. It might not be though, but from the picture, the tail plastic is DEFINITELY at a different angle then your bar..
their bolts are crap? Lol, sounds like you over torqued them..
And I hate to say it, but it looks like its crooked lol.. It might not be though, but from the picture, the tail plastic is DEFINITELY at a different angle then your bar..
your life is over.
#15
Re: 12 Bar Help
this is FI's site. u can use their instructions as a guide.
http://www.freestyleingenuity.com/si...750_04to05.pdf
http://www.freestyleingenuity.com/si...750_04to05.pdf
#16
Re: 12 Bar Help
yea i hear u on the welder thing. i bought a little gasless MIG...i use it atleast twice a month...my life is def easier now...seriously.
and ur **** is def crooked, you might want to learn how to use a level & do some basic geometry to square things up before you get a welder or your gonna hate life.
and ur **** is def crooked, you might want to learn how to use a level & do some basic geometry to square things up before you get a welder or your gonna hate life.
#18
Re: 12 Bar Help
In his defense about the crooked part, I have a FI flat bar on mine, and the subframes are so weak on them things that I can literally twist my bar with my hands and make it straight or crooked. I noticed mine looked a lil crooked after riding for a while a few crashes and so on.......so I grabbed onto it and twisted....'oila good as new. Glad I've only tapped it down once, or mine would be toast for sure!
If everyone was rich maybe then we could all buy new custom steel subframes.... in the meantime, just plate that bitch and do work.
If everyone was rich maybe then we could all buy new custom steel subframes.... in the meantime, just plate that bitch and do work.