f4i mods
#22
Re: f4i mods
actually bigger rotors don't = less control..... they = more precise control.... and better modulation.... and cooler running fluid too.
i like bigger rotors myself Stoppies are smoother....
#25
#27
Re: f4i mods
if you use a 600rr rear wheel then you don't have to swap any bearings or spacers or axle....
i have a 600rr rear on my f4i swingarm.... was a bitch to make it fit w/ bearings/spacers etc.... but it looks pimp w/ my 1000rr front rim
i have a 600rr rear on my f4i swingarm.... was a bitch to make it fit w/ bearings/spacers etc.... but it looks pimp w/ my 1000rr front rim
#32
Re: f4i mods
the 1000rr rotors are smaller then the 929 ?
i am speaking from what i have seen mitch adams rollling well over 800 feet on his little r6 rotors and ebrake rolling well into the 500's with a stock front end 636
and we gotta set somthing up so we can come ride with alll you crazy *** massholes
i am speaking from what i have seen mitch adams rollling well over 800 feet on his little r6 rotors and ebrake rolling well into the 500's with a stock front end 636
and we gotta set somthing up so we can come ride with alll you crazy *** massholes
#35
Re: f4i mods
the 1000rr rotors are smaller then the 929 ?
i am speaking from what i have seen mitch adams rollling well over 800 feet on his little r6 rotors and ebrake rolling well into the 500's with a stock front end 636
and we gotta set somthing up so we can come ride with alll you crazy *** massholes
i am speaking from what i have seen mitch adams rollling well over 800 feet on his little r6 rotors and ebrake rolling well into the 500's with a stock front end 636
and we gotta set somthing up so we can come ride with alll you crazy *** massholes
#36
Re: f4i mods
OK, so im running a 954rr front end on my f4i with D/b Bars , Full Fairing, What kind of clip ons can I run? Im used to a stock f4i front with clip ons turned out straight, and have been running d/b's and im not sure i like em yet.
I cant ride to my full potentional yet because of the front end swap, and the d/b 's its becoming frustrating.
I cant ride to my full potentional yet because of the front end swap, and the d/b 's its becoming frustrating.
#37
Re: f4i mods
OK, so im running a 954rr front end on my f4i with D/b Bars , Full Fairing, What kind of clip ons can I run? Im used to a stock f4i front with clip ons turned out straight, and have been running d/b's and im not sure i like em yet.
I cant ride to my full potentional yet because of the front end swap, and the d/b 's its becoming frustrating.
I cant ride to my full potentional yet because of the front end swap, and the d/b 's its becoming frustrating.
#38
Re: f4i mods
well i've had all the setups so far and DB's were the most comfortable,but it did feel like i was always hanging off of them.then i had vortex and 636 clips flipped and turned out but that setup beat my wrists to death.so my final setup is 0 degree's and so far i love em but i dont have much riding time with them due to mother nature.so i would say go with 0 degrees
#39
Re: f4i mods
flipped clipons beat the **** out of my wrists.i'd say i rode with them 10 times and everytime i get off the bike my wrist feel like they are clicking in my joints.my advise is go with the 0 degrees or what i'm going to try if the 0's dont work is a set of 7/8 drag bars
by the way the 0's have no upward angle (so they are more natural on the wrists pivot points
by the way the 0's have no upward angle (so they are more natural on the wrists pivot points
Last edited by punishmentcycle; 12-28-2007 at 10:22 AM.