Vortex cap problems.
#1
Registered User
Thread Starter
Join Date: Nov 2006
Location: Edmonton, Alberta, Canada
Age: 37
Posts: 1,145
Vortex cap problems.
Alright, so I am having a huge problem of fuel coming out the fuel cap. during stoppies, 12 position, and when it lays on it side it pours out from under the edge of the cap. This only happens while the bike is running. I can take the tank off and hold it upside down and it holds fuel perfect. I'm thinking it's a simple problem that the cap has no way to vent the pressure inside the tank and it is pushing the rubber seal up and letting fuel out. because it has done this to three different gas tanks I have tried to use the cap on. Has anybody had similar problems? And who is able to run what gas cap with no leaks.
#2
Re: Vortex cap problems.
Alright, so I am having a huge problem of fuel coming out the fuel cap. during stoppies, 12 position, and when it lays on it side it pours out from under the edge of the cap. This only happens while the bike is running. I can take the tank off and hold it upside down and it holds fuel perfect. I'm thinking it's a simple problem that the cap has no way to vent the pressure inside the tank and it is pushing the rubber seal up and letting fuel out. because it has done this to three different gas tanks I have tried to use the cap on. Has anybody had similar problems? And who is able to run what gas cap with no leaks.
#4
Re: Vortex cap problems.
order this one it is the **** never leaked, never had any problems with it http://www.powersportrider.com/cgi-bin/zcatjpg
#9
Registered User
Thread Starter
Join Date: Nov 2006
Location: Edmonton, Alberta, Canada
Age: 37
Posts: 1,145
Re: Vortex cap problems.
Dent job is good. Dented it with the cap bolted on, the seal is perfect. I'm assuming the cap stock05 is referring to is the harris performance one. Anybody else using what? How about the stock cap.
#12
#13
Re: Vortex cap problems.
i usually run the stock cap if the key matches the ingnition, but in my case most of the time it doesnt so i buy aftermarket
#14
Re: Vortex cap problems.
#15
Registered User
Thread Starter
Join Date: Nov 2006
Location: Edmonton, Alberta, Canada
Age: 37
Posts: 1,145
Re: Vortex cap problems.
#16
Re: Vortex cap problems.
#17
Re: Vortex cap problems.
#18
Re: Vortex cap problems.
SOLUTION for vortex cap...go to your local parts store and ask got a sheet of gasket papaer get a fairly think piece and cut to fit and it should be fine and while your at it make sure you put some anti sieze on the theads of the cap.
#20
Re: Vortex cap problems.