stunting with 'stock' gearing???

Thread Tools
 
Search this Thread
 
Old 11-20-2007 | 10:58 PM
  #21  
OnEWhEeLNEAL's Avatar
NealFoReal
 
Joined: Oct 2006
Posts: 36,000
From: QUEENS, NY BITCHES
OnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for rep
Re: stunting with 'stock' gearing???

Check out OMR on stock

http://www.youtube.com/watch?v=ClZ2rji_mUw

There's a debate going on where someone said he's down 2 in the front but whatever. OMR for president with his stock wheelies and subcages.
Old 11-20-2007 | 10:59 PM
  #22  
[T-Roy]'s Avatar
I Chose to No Longer Post
 
Joined: Oct 2006
Posts: 1,754
From: Lakeland, FL
[T-Roy] is an unknown quantity at this point
Re: stunting with 'stock' gearing???

Originally Posted by travisn
ok, i really appreciate the OMR reference (no scarcasm)

but i didnt ask for arguments on which is better, i just never heard of anyone doing it before just now. and no doubt just going from -1/stock to -1/+2 made a noticable difference.

research and make ur own decision, this can be argued all night. you can figure it out based on what you use ur bike for. asshat.
Old 11-20-2007 | 11:08 PM
  #23  
WristTwister164's Avatar
Registered User
 
Joined: Aug 2007
Posts: 66
From: Madison, WI, USA
WristTwister164 is a decent person
Re: stunting with 'stock' gearing???

Originally Posted by GHOSTIE
+1
and makes it a little easyer for you to learn, why make **** harder than it already is. when you become as old as OMR and earned yourself enough gangsta stripes then you too can rock stock
Make it easier to learn?!?! stock gearing is easier to learn on. **** u go up +10 +15 **** is twitchy as **** if your starting out. stick with stock gearing for learning...THAT makes it easier....don't mess with gearing yet. -1/+2..(if thats what your running) isn't that big of a gearing change....but don't go up higher until your whoolies...bp....and **** is on lock.

OMR can/does rock stock gearing cuz he can pimp like that
Old 11-20-2007 | 11:10 PM
  #24  
gixxer601's Avatar
Registered User
 
Joined: Dec 2005
Posts: 1,045
From: maryland
gixxer601 is a splendid one to beholdgixxer601 is a splendid one to beholdgixxer601 is a splendid one to beholdgixxer601 is a splendid one to beholdgixxer601 is a splendid one to beholdgixxer601 is a splendid one to beholdgixxer601 is a splendid one to beholdgixxer601 is a splendid one to behold
Re: stunting with 'stock' gearing???

im running -1 +3. nothing wrong with big gearing. i like running close to stock gearing but i think im gonna get me a 55 rear and just go with the flow. it just helps you progress a little faster. its more twitcy but on the f4i it gets to chugging and you gotta slip the clutch more than the 636. whatever you prefer go for it.

and when you say the words chasing bp in your post you can expect some flaming.

Last edited by gixxer601; 11-20-2007 at 11:13 PM.
Old 11-20-2007 | 11:12 PM
  #25  
Lowery636's Avatar
from the streets
 
Joined: Oct 2007
Posts: 219
From: LanCo, PA
Lowery636 is a decent person
Re: stunting with 'stock' gearing???

Originally Posted by [T-Roy]
man point is it don't matter ok. i run around all day long on the highway on +10.

here is the other argument. OMR kills it on stock gearing.

you lose a little topend. it makes it a little easier to clutch **** up.

DUDE! I made that "fock you squid" thing to put on my friends myspace! Thats cool as **** to see it actually being used. LOL
Old 11-20-2007 | 11:12 PM
  #26  
Mr. Rogers's Avatar
Registered User
 
Joined: Oct 2006
Posts: 162
From: EMPIRE STATE
Mr. Rogers is an unknown quantity at this point
Re: stunting with 'stock' gearing???

I LIKE BIG GEARING>>>> BUT I RIDE A F4I!!!! lol
Old 11-20-2007 | 11:13 PM
  #27  
Mr. Rogers's Avatar
Registered User
 
Joined: Oct 2006
Posts: 162
From: EMPIRE STATE
Mr. Rogers is an unknown quantity at this point
Re: stunting with 'stock' gearing???

-1 +10
Old 11-20-2007 | 11:42 PM
  #28  
travisn's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 91
From: ROC. NY.
travisn is a decent person
Re: stunting with 'stock' gearing???

Originally Posted by gixxer601
and when you say the words chasing bp in your post you can expect some flaming.
yea, i figured as much. ive gotten a few mile or so wheelies, but im not too cool with throwing it up wherever, esp with traffic. squid or not, idc. im not out to get ran over when i do fall.

and about the chasing part. idk if anyone is familiar with rochester ny, but there is an on ramp to 490 off of monroe that i knew where cops sit, and if there arent any cops there i like to wheelie down the ramp. just a little something.
Old 11-20-2007 | 11:57 PM
  #29  
Jay Carnes's Avatar
I Have Too Much Free Time
 
Joined: Oct 2002
Posts: 12,735
From: Diddleboro , MA
Jay Carnes will become famous soon enough
Re: stunting with 'stock' gearing???

IDK LOL BRB JK.

Your head is facing straight down and your forks are bottomed out - You just STABBED the front wheel as hard as you could for someone to take your picture! "what can I post for people reply to me?" GAY!

Last edited by Jay Carnes; 11-21-2007 at 12:00 AM.
Old 11-20-2007 | 11:58 PM
  #30  
old man roger's Avatar
also known as OMR
 
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
old man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for rep
Re: stunting with 'stock' gearing???

Originally Posted by OnEWhEeLNEAL
Check out OMR on stock

http://www.youtube.com/watch?v=ClZ2rji_mUw

There's a debate going on where someone said he's down 2 in the front but whatever. OMR for president with his stock wheelies and subcages.
stock gearing is doable but big gear is alot more fun and as far as me not being on stock gear in that clip there is always a hater......lol
Old 11-21-2007 | 12:01 AM
  #31  
Endo Andy's Avatar
Registered User
 
Joined: Nov 2007
Posts: 240
From: Rochester, NY
Endo Andy is a decent person
Re: stunting with 'stock' gearing???

Originally Posted by travisn
yea, i figured as much. ive gotten a few mile or so wheelies, but im not too cool with throwing it up wherever, esp with traffic. squid or not, idc. im not out to get ran over when i do fall.

and about the chasing part. idk if anyone is familiar with rochester ny, but there is an on ramp to 490 off of monroe that i knew where cops sit, and if there arent any cops there i like to wheelie down the ramp. just a little something.
not havin much luck here are ya travis? lol
Old 11-21-2007 | 12:30 AM
  #32  
travisn's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 91
From: ROC. NY.
travisn is a decent person
Re: stunting with 'stock' gearing???

Originally Posted by Andy28gsxr600
not havin much luck here are ya travis? lol
i guess its time to lay low.


its alot different being on a forum where you know .01% of the people, they are always better than you and quick to judge. its ok.

Last edited by travisn; 11-21-2007 at 12:34 AM.
Old 11-21-2007 | 12:38 AM
  #33  
travisn's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 91
From: ROC. NY.
travisn is a decent person
Re: stunting with 'stock' gearing???

Originally Posted by Jay Carnes
IDK LOL BRB JK.

Your head is facing straight down and your forks are bottomed out - You just STABBED the front wheel as hard as you could for someone to take your picture! "what can I post for people reply to me?" GAY!
so you are saying you never ever stabbed the brake while learning stoppies? and you always looked ahead? and you never asked someone to take your picture?

/thread
Old 11-21-2007 | 12:44 AM
  #34  
steelhead1's Avatar
Registered User
 
Joined: Jun 2007
Posts: 297
From: 518/845 NY
steelhead1 is a decent person
Re: stunting with 'stock' gearing???

don't lay low! you axed a kestion and got sum pinions!!:YEAH go with what you like. i'm lucky enough to have 2 bikes. the 1k is stock and the 750 is up like fukin 18 or somethin retarded. i can rock it all day on the 1000 but i have a tough time slowing it down. plus i get scared cause it's *******! i made the 750 outta 2 wrecked bikes and don't give a ***. to each his own!!






p.s. i love rochester i fish the gennessee river all the time.


p.s.s. + 18 :YEAH
Old 11-21-2007 | 12:53 AM
  #35  
travisn's Avatar
Thread Starter
Registered User
 
Joined: Nov 2007
Posts: 91
From: ROC. NY.
travisn is a decent person
Re: stunting with 'stock' gearing???

i hope you dont eat those fish...
Old 11-21-2007 | 12:56 AM
  #36  
steelhead1's Avatar
Registered User
 
Joined: Jun 2007
Posts: 297
From: 518/845 NY
steelhead1 is a decent person
Re: stunting with 'stock' gearing???

nope. but i feed em to my friends!! HAHAHAHAHAHA!!!!:YEAH
Old 11-21-2007 | 12:56 AM
  #37  
OnEWhEeLNEAL's Avatar
NealFoReal
 
Joined: Oct 2006
Posts: 36,000
From: QUEENS, NY BITCHES
OnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for rep
Re: stunting with 'stock' gearing???

Originally Posted by old man roger
stock gearing is doable but big gear is alot more fun and as far as me not being on stock gear in that clip there is always a hater......lol
True indeed - there's always a hater. Anytime I see this debate I always post this up - I like the song and the clip - go together well.
Old 11-21-2007 | 01:05 AM
  #38  
old man roger's Avatar
also known as OMR
 
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
old man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for rep
Re: stunting with 'stock' gearing???

Originally Posted by OnEWhEeLNEAL
True indeed - there's always a hater. Anytime I see this debate I always post this up - I like the song and the clip - go together well.
i got my big sprocket back on it now but if any one ever gives me **** about it i just shift into second gear and that usually shuts them up.......lol
Old 11-21-2007 | 01:11 AM
  #39  
Re-Micks's Avatar
YUT UGH
 
Joined: Feb 2007
Posts: 1,570
From: Cincinnati, Ohio
Re-Micks is a decent person
Re: stunting with 'stock' gearing???

i rode my 636 with stock sprockets for about a month.... not to bad just had to take a day or 2 to adj. to the +15 sprocket
omr is a cheater
Old 11-21-2007 | 01:16 AM
  #40  
old man roger's Avatar
also known as OMR
 
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
old man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for repold man roger User spends way too much time asking for rep
Re: stunting with 'stock' gearing???

Originally Posted by Cin-O-Nasty
i rode my 636 with stock sprockets for about a month.... not to bad just had to take a day or 2 to adj. to the +15 sprocket
omr is a cheater
i cheats like a ***** ***** i gots me some blinkas with stoppie fluid in em and mines mud flapa is really a led weight to make them there cat walks easy ands mines mirrors act like a balance pole for whens imma standin on the gas tanker......lol



All times are GMT -4. The time now is 12:21 PM.