I just got my ACERBIS diamond lights and the instructions aint bike specific so i need your experience with wiring it up. I have 2 blues connected together and 1 white and 1 green wire for the headlight wich ones do i connect the ACERBIS too?Also, what did you do with all the wires connected to the front stay?

 

damn thats alot of wires! i guess im lucky to have one harness on the gixxer!

well for starters i know not many people run the fairing stay along with the streetfighter headlight. i'd ziptie and or tape the loose wires so its clean looking and because you don't wanna mess em up.

and as far as lights well you need to locate the high and low beam connectors and trace them with a volt meter

 

either get a wiring diagram or a test light. you want to connect one wire from each light to the green and then take the test light and put in the wire if it lights up its the low beam if not turn on the high beam and it should light up and be the high beam light. or you can just use the lights in place of a test light.

 

tie two blues to each light and tie the green to the other end keep to...blah nvm good luck

 

yea get rid of the fairing stay...just strap the light to the forks... and i have all my wirers tuck up under my tank...and i just wired it to the battery with a switch in one of the lines