Custom Subcage
10-08-2007 | 09:49 PM
#1
Thread Starter
Registered User
Joined: Jan 2006
Posts: 56
From: Melbourne, Victoria
Custom Subcage
No trying to cut anyones lunch here but we have an awesome product available.
Engineered Subcage ZX636 05-06 only at this stage.
Made from lasercut Bisalloy 80. Gives maximum strength to weight ratio. Three times stronger than normal mild steel.
Replaces the original mounts exactly, and can be used with the original fold-up pillion footpeg, or solid stunt pegs.
Powder coated satin black.
Introductory price $199 USD including airfreight.
Solid stunt pegs Available made out of 7075 alloy, they will also be shorter than the pictures and have a small slider bung in the end to prevent the pegs from digging into the ground.
$30 USD
Shipped from Australia.
Engineered Subcage ZX636 05-06 only at this stage.
Made from lasercut Bisalloy 80. Gives maximum strength to weight ratio. Three times stronger than normal mild steel.
Replaces the original mounts exactly, and can be used with the original fold-up pillion footpeg, or solid stunt pegs.
Powder coated satin black.
Introductory price $199 USD including airfreight.
Solid stunt pegs Available made out of 7075 alloy, they will also be shorter than the pictures and have a small slider bung in the end to prevent the pegs from digging into the ground.
$30 USD
Shipped from Australia.
10-08-2007 | 10:28 PM
#3
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Re: Custom Subcage
i was hoping this thread would just go away and right when it almost dropped of the new post page you bumped it back to the top......lol
thanks for the compliment about my OMR SUBCAGE though
thanks for the compliment about my OMR SUBCAGE though
10-08-2007 | 10:43 PM
#5
Thread Starter
Registered User
Joined: Jan 2006
Posts: 56
From: Melbourne, Victoria
Re: Custom Subcage
Made from lasercut Bisalloy 80. Three times stronger than normal mild steel.
looks can be deceiving.
as i said this is just another option, high quality product.
Not trying to take over the market.
looks can be deceiving.
as i said this is just another option, high quality product.
Not trying to take over the market.
10-08-2007 | 10:53 PM
#6
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Re: Custom Subcage
i wish every one else would just go away so i could be the subcage king...lol 
10-08-2007 | 11:14 PM
#9
Registered User
Joined: Apr 2004
Posts: 550
From: Melbourne, AUS
Re: Custom Subcage
Roger's cages are good but they are mild steel, not Bisalloy. They also cannot be made to run with solid pegs if the customer wants. The bigger companies: Sick Innovations and Powers aren't making 05-06 636 sub cages yet. If you own one, you would know how tricky the subframe is to work with.
The attention to detail with these subcages is unsurpassed. The stock luggage loops are retained. The tabs for the pegs actually go through the subcage and are welded on the inside. So no ugly uneven weld beads are visible. These aren't being made at home with a $200 MIG. They are CNC laser cut, the pegs are solid 7075 turned on an industrial lathe. Quality wise, they would be comparable with ESD equipment, except with more exotic materials.
The attention to detail with these subcages is unsurpassed. The stock luggage loops are retained. The tabs for the pegs actually go through the subcage and are welded on the inside. So no ugly uneven weld beads are visible. These aren't being made at home with a $200 MIG. They are CNC laser cut, the pegs are solid 7075 turned on an industrial lathe. Quality wise, they would be comparable with ESD equipment, except with more exotic materials.
10-08-2007 | 11:19 PM
#11
Thread Starter
Registered User
Joined: Jan 2006
Posts: 56
From: Melbourne, Victoria
Re: Custom Subcage
the sharp edges are for looks
NO MONEY comes from this just covering costs of laser cutting and powder coating, to provide a good product
All manufactured and engineered professionally. not by myself.
NO MONEY comes from this just covering costs of laser cutting and powder coating, to provide a good product
All manufactured and engineered professionally. not by myself.
10-08-2007 | 11:38 PM
#14
Thread Starter
Registered User
Joined: Jan 2006
Posts: 56
From: Melbourne, Victoria
Re: Custom Subcage
The manufactures of this product are our sponsors who have done this for us, They supply crash protection all over Australia, They have made a small amount just because there was no point making 1 if it sells it sells, it is a very small part of what they do, so i will say this again there is no money in it for us. Sponsors look after us just trying to give something back.
10-08-2007 | 11:43 PM
#15
also known as OMR
Joined: Jul 2006
Posts: 79,288
From: OMR INDUSTRIES in west palm beach florida
Re: Custom Subcage
The manufactures of this product are our sponsors who have done this for us, They supply crash protection all over Australia, They have made a small amount just because there was no point making 1 if it sells it sells, it is a very small part of what they do, so i will say this again there is no money in it for us. Sponsors look after us just trying to give something back.
10-09-2007 | 05:05 PM
#20
This.. is my boomstick!!
Joined: Jan 2007
Posts: 1,798
From: You can find me in the club
Re: Custom Subcage
The manufactures of this product are our sponsors who have done this for us, They supply crash protection all over Australia, They have made a small amount just because there was no point making 1 if it sells it sells, it is a very small part of what they do, so i will say this again there is no money in it for us. Sponsors look after us just trying to give something back.
BUT, id rock omr just my
good luck tho
