gpr stabalizer with front end swap?
#1
gpr stabalizer with front end swap?
I have a f4i with a 954 front end swap and i was wanting to get a gpr stabilizer. my question is this, does anyone even make one for this combination? Whats everyone rocking with this setup? It doesn't necessarily have to be gpr.
#3
Re: gpr stabalizer with front end swap?
ok so u know gpr stablizers mount up to the nut that runs thru ur neck and bolts that press against the triple so get the one for the 954 if u have the triples from the 9 and get the stabalizer dont listen to sgt stud his whellies are garbage
#4
Re: gpr stabalizer with front end swap?
check ur length in between the bolt holes on it cause im pretty sure the f4i tank mounts are pretty damn close im going riding with the honda crew down here tomorrow so ill take a look and post it up when i get back
#8
Re: gpr stabalizer with front end swap?
well if you have a 954 tripple then youre going to need the gpr mount that goes to the tripple clamp from a 954 and the tank mount from an f4i. thats my guess. the 954 and f4i triples are way different so that mount prob wouldnt swap over but the 954 and f4i tank mounts might be the same i cant tell.
#9
Tell your mom thanks
Join Date: Oct 2003
Location: Canadia
Age: 37
Posts: 184
Re: gpr stabalizer with front end swap?
exactly, buy a GPR for either a 954 or an F4i and you're going to have to buy the mounting kit for the other half of the bike. Youll need a mounting kit for both a 954 and an F4i and piece together your own mounting system. Easy as **** once you get the parts and see WTF i mean.
#11
Re: gpr stabalizer with front end swap?
everyone else, thanks for the input. I think tice rolls this set up im just going to order it from hai and let them get it together for me. I was just out in the g-rage last night working on this bitch when i thought about that. on a side note, the bike is going to be straight nasty. I will post up pics of all the **** we have done to this bitch.
lata
lata
#12
Re: gpr stabalizer with front end swap?
the tank mount bolts have the same spacing so that mount will work with a couple of small shims underneath it.as long as you have the 954 kit you should have no problems...same set up is on mine
#13
Re: gpr stabalizer with front end swap?
Yeah the gprs are the same, the mounts r different. I had a f4i w gpr and 954 front end and I bought a 636 and new a buddy whos gpr got stolen so I bought his mount and put it on my bike-I let the mount go with my f4i so if u want to buy a gpr used for any bike, he would probably sell u the mount. He's "louisville rider" u can ususally find him on stunt usa.
Thread
Thread Starter
Forum
Replies
Last Post