wheelis on zx7

Thread Tools
 
Search this Thread
 
Old 09-01-2007 | 10:20 PM
  #1  
antbankszx7's Avatar
Thread Starter
Registered User
 
Joined: Sep 2007
Posts: 5
From: springfeild,ma usa
antbankszx7 is a decent person
wheelis on zx7

anyone have any tips on getting a heavy *** zx7 up? hard time doing 2nd gear wheelies
Old 09-01-2007 | 10:35 PM
  #2  
rookie stunter's Avatar
***tastic
 
Joined: Apr 2007
Posts: 728
From: elizabeth city, nc
rookie stunter is a decent person
Re: wheelis on zx7

clutch it up high and fast in first
Old 09-01-2007 | 10:40 PM
  #3  
97CL3.0's Avatar
Registered User
 
Joined: Apr 2006
Posts: 5
From: Douglasville, GA, USA
97CL3.0 is an unknown quantity at this point
Re: wheelis on zx7

small sprocket change.
Old 09-01-2007 | 10:45 PM
  #4  
Sean24's Avatar
I Love To Post!
 
Joined: Aug 2003
Posts: 7,643
From: Denver
Sean24 is an unknown quantity at this point
Re: wheelis on zx7

I hate you.

we should have a minimum post requirement before threads can be started, and until you have 60 posts you can only post once every 1/2 hour.
Old 09-01-2007 | 11:26 PM
  #5  
nyRocketkid's Avatar
Registered User
 
Joined: Nov 2006
Posts: 2,698
From: ..
nyRocketkid is an unknown quantity at this point
Re: wheelis on zx7

Try bouncing when you clutch. I had to do this on my F2 in second cause it was so heavy.

Pull in the clutch, rev the bike up, bounce down to compress the front fork springs, when there all the way compressed release the clutch and this will help push the front up.

So basicly when you clutch up bounce before you release the clutch. This should help.
Old 09-01-2007 | 11:28 PM
  #6  
nyRocketkid's Avatar
Registered User
 
Joined: Nov 2006
Posts: 2,698
From: ..
nyRocketkid is an unknown quantity at this point
Re: wheelis on zx7

Originally Posted by 97CL3.0
small sprocket change.
a bigger rear sprocket? If you put a smaller sprocket on the rear it will have a higher top speed and be harder to get up.
going down a tooth in the front though is equal to +2.75 in the rear though.
Old 09-02-2007 | 11:27 AM
  #7  
-SKETCHY-'s Avatar
STUNTRIDE FRONTLINE
 
Joined: Jun 2005
Posts: 13,621
From: GEORGIA
-SKETCHY- has much to be proud of-SKETCHY- has much to be proud of-SKETCHY- has much to be proud of-SKETCHY- has much to be proud of-SKETCHY- has much to be proud of-SKETCHY- has much to be proud of-SKETCHY- has much to be proud of-SKETCHY- has much to be proud of-SKETCHY- has much to be proud of
Re: wheelis on zx7

Originally Posted by nyRocketkid
a bigger rear sprocket? If you put a smaller sprocket on the rear it will have a higher top speed and be harder to get up.
going down a tooth in the front though is equal to +2.75 in the rear though.
it really doesn't matter cause its a zx7 Take all the bodywork off and the bike should loose about 100 lbs. put a 84758478437 tooth sprocket on the back. J/K but seriously you got to rape that thing to get it up in second
Old 09-02-2007 | 11:36 AM
  #8  
50Outlaw's Avatar
da fiddy bitches!!!
 
Joined: Feb 2004
Posts: 15,816
From: Austin, Tx
50Outlaw has a reputation beyond repute50Outlaw has a reputation beyond repute50Outlaw has a reputation beyond repute50Outlaw has a reputation beyond repute50Outlaw has a reputation beyond repute50Outlaw has a reputation beyond repute50Outlaw has a reputation beyond repute50Outlaw has a reputation beyond repute50Outlaw has a reputation beyond repute50Outlaw has a reputation beyond repute50Outlaw has a reputation beyond repute
Re: wheelis on zx7

Originally Posted by antbankszx7
anyone have any tips on getting a heavy *** zx7 up? hard time doing 2nd gear wheelies
best way to get it up is to take it to the dealer and trade it for a better bike
Old 09-02-2007 | 11:42 AM
  #9  
nomad's Avatar
Registered User
 
Joined: Aug 2006
Posts: 177
From: BRONX,NY
nomad is an unknown quantity at this point
Re: wheelis on zx7

Originally Posted by nyRocketkid
a bigger rear sprocket? If you put a smaller sprocket on the rear it will have a higher top speed and be harder to get up.
going down a tooth in the front though is equal to +2.75 in the rear though.
i think the guy meant to go up in sprocket size but just a "small" change . prob best 2 get another bike.
Old 09-02-2007 | 01:15 PM
  #10  
nyRocketkid's Avatar
Registered User
 
Joined: Nov 2006
Posts: 2,698
From: ..
nyRocketkid is an unknown quantity at this point
Re: wheelis on zx7

Originally Posted by 50Outlaw
best way to get it up is to take it to the dealer and trade it for a better bike
hehe LMFAO. :YEAH
That should do it.
Old 09-02-2007 | 01:29 PM
  #11  
da Liks's Avatar
Registered User
 
Joined: Oct 2004
Posts: 4,142
From: Rotterdamn Europe
da Liks is a decent person
Re: wheelis on zx7

Doodle used to wheelie the **** out of a zx7..
Old 09-02-2007 | 02:37 PM
  #12  
punishmentcycle's Avatar
Registered User
 
Joined: Aug 2006
Posts: 2,092
From: hartford ct
punishmentcycle is a decent person
Re: wheelis on zx7

practice will wheelie that one...seems like some people on here never messed with the older bikes...it just takes some lovin
Old 09-02-2007 | 04:21 PM
  #13  
bdc_Marky's Avatar
Registered User
 
Joined: May 2007
Posts: 699
From: west vagina university
bdc_Marky is a decent person
Re: wheelis on zx7

my 94 yzf 750 was a heavy bitch and that had no problem coming up in 2nd. dont be scared on the throttle
Old 09-02-2007 | 06:04 PM
  #14  
OnEWhEeLNEAL's Avatar
NealFoReal
 
Joined: Oct 2006
Posts: 36,000
From: QUEENS, NY BITCHES
OnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for repOnEWhEeLNEAL User spends way too much time asking for rep
Re: wheelis on zx7

Originally Posted by Sean24
I hate you.

we should have a minimum post requirement before threads can be started, and until you have 60 posts you can only post once every 1/2 hour.
I agree. This is what I got when I tried to post up the ******** on the Stern Forum. I signed up just to be able to post it on there. I wanted to be one of the undesirables.

Sorry, but you can't post this. You are a junior member and under probation. As a Jr, you can not start new threads. You can only reply to existing threads. Even worse, once you make a reply, there a 30 minute wait before you can make your next one. This may seem like a huge inconvenience to you but it's part of how we weed out the undesirables. We figure if you put in the time to get through the probation then you're probably a fan. This restriction will be automatically lifted once you've fulfilled the 30/30/30 Rule.

The 30/30/30 Rule: When you first register you'll be a Jr Member. You will not have access to the member only forums until you are a Full Member. There is a 30 day / 30 reply probationary period. After you've made 30 replies and 30 days have past, your account will automatically be upgraded. In order to keep newbies from spamming the board with 100 crap posts in 5 minutes, during this probationary period you will not be allowed to start new threads and you will only be able to make one reply every 30 minutes. I know this sucks, but just deal with it. Don't bitch about it. It's how we do things and it's how we like it. If you are a fan, enjoy the site and occasionally make a post. The 30 days will be up in no time. Supporter Status: If you don't have time for all that crap, become a SFN Supporter. Supporter status gives you full access to SFN and additional advanced features without the wait. These are the sections of SFN and the added site features that eat up the most bandwidth or consume more of the staff's time, and therefor are too cost consuming to make available to everyone. Things like being able to upload attachments, custom avatars, and private messages. CLICK HERE for more information about becoming a SFN Supporter.
Old 09-02-2007 | 06:50 PM
  #15  
[T-Roy]'s Avatar
I Chose to No Longer Post
 
Joined: Oct 2006
Posts: 1,754
From: Lakeland, FL
[T-Roy] is an unknown quantity at this point
Re: wheelis on zx7

seat time.

experience.
Old 09-02-2007 | 06:58 PM
  #16  
MILFslovemyxr50's Avatar
Registered User
 
Joined: Aug 2007
Posts: 42
From: Egg Harbor, NJ
MILFslovemyxr50 is a decent person
Re: wheelis on zx7

if my friend can wheelie the **** out of his old *** Yamah YZF600R that weighs easily the same weight as a zx7r then you can wheelie that zx7 lol.
Old 09-02-2007 | 07:15 PM
  #17  
Lukas's Avatar
Registered User
 
Joined: Oct 2003
Posts: 1,029
From: Stockholm
Lukas is a decent person
Re: wheelis on zx7

Are you talking about ZX7 or ZX7R??? Coz if you mean the ZX7 (thats a naked bike, not a sportsbike) then good luck, that **** is a tank, had it at work, propably one of the worst bikes I have ever driven lol:P
Old 09-02-2007 | 07:33 PM
  #18  
Sean24's Avatar
I Love To Post!
 
Joined: Aug 2003
Posts: 7,643
From: Denver
Sean24 is an unknown quantity at this point
Re: wheelis on zx7

Originally Posted by OnEWhEeLNEAL
I agree. This is what I got when I tried to post up the ******** on the Stern Forum. I signed up just to be able to post it on there. I wanted to be one of the undesirables.

Sorry, but you can't post this. You are a junior member and under probation. As a Jr, you can not start new threads. You can only reply to existing threads. Even worse, once you make a reply, there a 30 minute wait before you can make your next one. This may seem like a huge inconvenience to you but it's part of how we weed out the undesirables. We figure if you put in the time to get through the probation then you're probably a fan. This restriction will be automatically lifted once you've fulfilled the 30/30/30 Rule.

The 30/30/30 Rule: When you first register you'll be a Jr Member. You will not have access to the member only forums until you are a Full Member. There is a 30 day / 30 reply probationary period. After you've made 30 replies and 30 days have past, your account will automatically be upgraded. In order to keep newbies from spamming the board with 100 crap posts in 5 minutes, during this probationary period you will not be allowed to start new threads and you will only be able to make one reply every 30 minutes. I know this sucks, but just deal with it. Don't bitch about it. It's how we do things and it's how we like it. If you are a fan, enjoy the site and occasionally make a post. The 30 days will be up in no time. Supporter Status: If you don't have time for all that crap, become a SFN Supporter. Supporter status gives you full access to SFN and additional advanced features without the wait. These are the sections of SFN and the added site features that eat up the most bandwidth or consume more of the staff's time, and therefor are too cost consuming to make available to everyone. Things like being able to upload attachments, custom avatars, and private messages. CLICK HERE for more information about becoming a SFN Supporter.
im on there
Old 09-02-2007 | 07:35 PM
  #19  
ZX7Ninja's Avatar
Registered User
 
Joined: Aug 2007
Posts: 3
From: TX
ZX7Ninja is a decent person
Re: wheelis on zx7

Must be ZX7R
Old 09-02-2007 | 08:46 PM
  #20  
fastrsho's Avatar
Registered User
 
Joined: Aug 2007
Posts: 150
From: valdosta ga
fastrsho is a decent person
Re: wheelis on zx7

You dont have to get rid of the bike..alot of epople nowadays are spoiled with their new bikes,they say get new ones cause they can afford to do that.I have a 97 yzf 750 that is a tank and i can do anything i wanna do on it.Grantd its a tank like yours but the only thing you can do about that is a lot of seat time and practice...couple that with a little bit of throttle and clutch and youll be twelveing with the rest.I do agree that a newer lighter bike with a little more power to weight ratio will catapault you into the ease of getting it up,but if you cant afford it then change your sprockets out and keep at it.



All times are GMT -4. The time now is 10:52 AM.