I've been researching and to my nerdy point dexter calculations...


but seriously
i think i have solved the 06zx10r front end problem!

what do you think about taking the complete 06 zx10r front end and pressing out the 10r's stem and pressing in the 03's stem in its place and using the
03's top triple clamp aswell since it is flat and makes for a great DB bar surface.

(wheeliest and Johny p gave me the idea)...PROPS!


any one interested or knowledgable on this topic please chim in

i currently have a thread up on a ZX forum so we will see whats good in the hood.

 

zing zing u can hammer the stem out pretty easy to, just thread the nut onto the top of it first so u dont **** the threads.

 

wouldnt it be better to use a press?

canyou reference me to any good threads or how to's on step by step instructions on removing and replacing the complete steering bearings?

and does any one have a pdf file of hte 03-04 636 i can download?

 

lmao that was my idea and well we bent to press plates using a 30ton press and the lower triple started to bow. if u find a way please let me know and johny i need some of those calipers spacers to use the 05-06 rotors on my 03-04 forks till i get the forks ill pm u tho

oh yea dan contacted like 4 machine shops that said they could do it but only 1 out of 10 usually work the other 9 end up snapping in half

 

Here's 2 sites to download the manual, they got almost every bike manual u could want

http://www.repairmanualclub.com/inde...er=ASC&limit=0

http://www.bikechatforums.com/viewtopic.php?t=41567

 

Yeah That was my first idea. But from trying and not being successful and talking to the machine shops they did say they would do it but also said they have tried be4 and have broken alot of triples doing it. but it is possible but you might want to buy a few triples for the process.I just sold mine and got new 07 636 forks and had $125 extra dollars.
Me and Joe Vertical talked about it and didn't come up with anything else.
One thing i thought of is you could possibly use 1000rr top and lower triples?
I herd they would fit the other day but im not sure so don't quote me on that but it's something to look into.

 

luxury joe pressed out an 954 stem and put in an gixxer 1k front end so its possible

 

Didn't TonyL do the swap?

 

...or you could just use some forks / wheels that are easy to swap.

My 06 fork and wheel swap took a little over an hour... (both wheels)

 

But then there is no gangster RED forks HAZEN

 

Or Limited Edition forks

 

THAT IS ALWAYS A POSSIBILITY BUT I THINK A LITTLE OUT OF PLACE ON DANS BIKE

 

just put a 05-06 636 front end on before you hurt yourself! lol

 

Well said fish! I thought about it and ended up with the same conclusion.
Good luck if you do try to use them tho.

 

hyperryder had a zx10 front end on his.

 

same problem with the 05-06 front ends? F**k this blows! imma just rock the stock front end til i sell my clean minty 06 zx10r front end...any one wanna buy it? $425 plus shipping

 

i also have a 05 636 front end, your saying i can just take the forks/wheel out and put it into my 03 triples?

 

ernie put a 05-06 front end on, i think it just slides in?

 

why dont you guys answer ur phones? i been trying to get with E on a few questions on the bike, did his go in with only one top nut holding it on?

 

425 shipping ..hmm does it comes with wheel?