ghetto rigin!
#64
Re: ghetto rigin!
jb weld and a cut up pepsi can on the stator cover.(buddies bike)
short somewhere from my selinoid to my start button so i started my bike with a screw driver for about 6 months then just hooked two wires and a switch up !!
short somewhere from my selinoid to my start button so i started my bike with a screw driver for about 6 months then just hooked two wires and a switch up !!
#67
Re: ghetto rigin!
busted a hole in my radiator, cut the fin with wire cutters and folded it back with needle nose pliers, didnt leak or get hot. still rockin that ****. acerbis is held on with zip ties and so is my battery tray, oh, and my taillight too.
#68
Re: ghetto rigin!
why is your acrebis held on with zips?? didnt yours come with those straps or did you bust that **** too
#70
#72
Re: ghetto rigin!
this sucks typing because i went down tonight.. but anyways .
headlight ziptied on, windshield ziptied, right and left fairing ziptied, non fairing stay , no cluster , bent front wheel ,barely any brakes ,tailight ziptied, radiator 12 guage wire cause the zipties broke,leaky radiator has jb weld and quick steel , battery tray in 3 different pieces ziptied, tank has a helicopter o ring in it so it doesnt leak on stoppies,right peg bent , i dont feel like typing what else is wrong becaue i think my shoulders broke:YEAH
headlight ziptied on, windshield ziptied, right and left fairing ziptied, non fairing stay , no cluster , bent front wheel ,barely any brakes ,tailight ziptied, radiator 12 guage wire cause the zipties broke,leaky radiator has jb weld and quick steel , battery tray in 3 different pieces ziptied, tank has a helicopter o ring in it so it doesnt leak on stoppies,right peg bent , i dont feel like typing what else is wrong becaue i think my shoulders broke:YEAH
#74
#76
Re: ghetto rigin!
i zip tie pretty much everything on my bike.. when my 929 left rear pass bracket broke i ziptied the one from the f4i lot bike on it just to do some stag whoolies.. it was strong as **** too but didnt wanna test my luck for too long
#77
Re: ghetto rigin!
i have a bad problem with losin bolts. my passenger peg is held by zip ties on the exhaust side. and my tank and seat are both held on by one bolt. i mounted my tail light upside down so u can see it with the 12 bar and it is ziptied, after i put db bars on i had to re-route a bunch of cables and the tank seemed like it was tryin to cut my throttle cables. i rigged up a spacer to raise the tank a little. the bolt is from a bar end because it is the same thread and longer, and gor a spacer i used two nuts that were slightly larger than the bolt but it seems to work fine. btw i thought i was the zip tie king but i have been put badly to shame.
#80
Re: ghetto rigin!
DO IT!!!!!!! cuz i got some zipties from walmart tried to bend i a little to go around my frame and it broke just bending it like 45degres