all metal f4i tail fairing
05-20-2007 | 08:27 PM
#21
Thread Starter
Registered User
Joined: Apr 2006
Posts: 4,923
From: Apple Valley CA
05-20-2007 | 09:07 PM
#23
Thread Starter
Registered User
Joined: Apr 2006
Posts: 4,923
From: Apple Valley CA
Re: all metal f4i tail fairing
I GOT RHINO LINER ON MINE AND ITS CRACKING AT THE MOUNTING POINTS AND ALSO LOOKS RATHER WACK PLUS WITH THE CAGE IM ROCKIN AND MY 2 OCLOCK BAR I HAVENT EVEN TOUCHED THE REAR FAIRING ON THE GROUND WHEN ITS DONE I WILL POST SOME PICS IM GOING TO USE 1/8 INCH ALUMINUN SO IT SHOULD BE STRONG AS HELL MATERIAL ALONE WILL COAST 125
Last edited by Scott-; 05-20-2007 at 09:10 PM.
05-20-2007 | 09:28 PM
#27
Registered User
Joined: Sep 2005
Posts: 3,675
From: The Bay Area
Re: all metal f4i tail fairing
but if you look close in this pic you can kinda see it under my feet!!
05-20-2007 | 10:37 PM
#29
Registered User
Joined: Nov 2006
Posts: 2,698
From: ..
Re: all metal f4i tail fairing
I think it's a sweet idea. I've been talking to this guy through pms & it's gonna work good with my SI round bar I'm gonna have. I won't crack the **** out of my plastics & it will look 10x hotter than a cobbled up stock tail. It's gonna be made out of 1/8" aluminum so **** will be strong. Buy a couple new tails & your gonna spend this anyways. 
05-20-2007 | 10:40 PM
#30
Thread Starter
Registered User
Joined: Apr 2006
Posts: 4,923
From: Apple Valley CA
Re: all metal f4i tail fairing
I think it's a sweet idea. I've been talking to this guy through pms & it's gonna work good with my SI round bar I'm gonna have. I won't crack the **** out of my plastics & it will look 10x hotter than a cobbled up stock tail. It's gonna be made out of 1/8" aluminum so **** will be strong. Buy a couple new tails & your gonna spend this anyways.
hell ya my thoughts exactly
05-20-2007 | 11:15 PM
#34
Registered User
Joined: Apr 2006
Posts: 597
From: south cali
Re: all metal f4i tail fairing
hell ya.... that would be sick to have my tail section made from aluminum... im sick of cracked tail fairings from seat standers....
make one for a gsxr so i can buy "1" instead of dozens of plastic ones....
make one for a gsxr so i can buy "1" instead of dozens of plastic ones....
05-20-2007 | 11:22 PM
#35
Registered User
Joined: Sep 2004
Posts: 2,420
From: MD
Re: all metal f4i tail fairing
it would be cool for a guy who dose not do any stoppies. the last thing i wand is some metal hammpe smashing me. it would bee cool thought. i would buy it. but what if you bend the **** out of it.
05-20-2007 | 11:34 PM
#37
haters are your best fans
Joined: May 2006
Posts: 849
From: Fort Campbell,KY
05-20-2007 | 11:39 PM
#38
Registered User
Joined: Apr 2006
Posts: 597
From: south cali
Re: all metal f4i tail fairing
if you flip an endo, your main worry should be your bar karate chopping you in your spine....
every drop ive had, ive never seen the tail section hit ground... its always saved by cages and bar...
this is a sick way to save some bucks
05-20-2007 | 11:44 PM
#39
Registered User
Joined: Apr 2006
Posts: 597
From: south cali
Re: all metal f4i tail fairing
exactly... why waste good sesh time, when if you had an aluminum tail, you would............. "set it and forget it"
the only way this thing will get bent up, is if you squid stunt and destroy your cages and bar first....
05-20-2007 | 11:48 PM
#40
Registered User
Joined: Sep 2004
Posts: 2,420
From: MD
Re: all metal f4i tail fairing
bro i fliped hard a month a go i run a round bar. what hit me was the tail. if my tail were metal id be done. my seat and plastic gave alittle. its a good idea for every thing else just not for stoppies. good luck
