MikeTeamChaos

Ok basically i have my cage and sproket and i have my yosh pipe shortend. Now i hear the subfram on the 636 is week. I have the 05. Now is there nething i can do to help make it stronger? I wanna get the 12 bar but ive heard bad stories about them if you scrape them the wrong way..ect. Now im thinking about the round bar but i also heard those are for more experienced riders.

I know if i drill into my subframe it will weakin it. But i took the tail off today and it looks like if i was to order a 12 bar or round bar from SI i see to empty holes on each side so maybe i can just tap into those w/o dilling??

If anybody can answer any of those questions it help alot. Thanks!

PAINTRIXX

i have an 06,the si round bar uses the exaust hanger bolt & the two lil 10mm bolts on each side.

subframe is gaaaabage ,if yo do anything other than gentley tap it your **** will bend.i plated the back of mine,and also welded gussets tying the back & front together for strength.if you dont know an aluminum welder look up hyperrider and look at the way he braced his.you can do it the same way because of your pipe,i could not because i have the 2brothers twin carbon cans.


no scrape

MikeTeamChaos

damn that really sucks..can u post picks of ur plating?

MikeTeamChaos

one more thing...if i put the stock pipe on and scrape that would that be better?

PAINTRIXX

I WILL PULL MY TAIL OFF AND GET SOME PICS POSTED 2MORROW,
IF YOU`R JUST LEARNING USING THE STOCK PIPE MAY NOT BE A BAD IDEA,THEN WHEN YOU GET SMOOTH PUT THE YOSH BACK ON

chirpin4th

the stock pipe has been very forgiving to me.

NYstunter636

...i think i have the only strong 05 636...i have gorilla scraped the **** out of my bike back in the day....i looped it at 45...and the right clip-on broke....maybe i'm just lucky tho ....

MikeTeamChaos

yeah im still learning

NYstunter636

you should be learning every time you go out...or your might as well stayed home that day....i haven't been at it long either....gotta get brake and throttle control down....that only comes with seat time...

cr0wn3d

if your willing to spend some dollas then get a sub cage like the one powers has out now, with the rear peg setup and subties

that shitll tighten ur bike up like a 12 yr old

PAINTRIXX

IT MAKES IT STIFFER,BUT DOESNT KEEP THE END FROM BENDING

Beto

just scrape the stock pipe I've scraped plenty of times and I got the basic idea of brake control on mine, sub is still straight...

PAINTRIXX

GANGSTA...

ABEStunts

powers doesn't make a subcare for the 05/06 636 only paintrixx does

PAINTRIXX

THEY HAVE THEM NOW

chirpin4th

After youve scraped the stock exhaust on the 636 take a look and make sure you didn't pinch it shut. Ive had to pry mine open sooo many times it just gets worse after every scrape.... or stall onto the pipe.

s0nofg0d

omr has a cage too

kaiks

does the 04 have the same problem with the subframe? i just picked me up a 04.

PAINTRIXX

THE 03-04 IS MUCH STRONGER,BUT NO BAR TRICKS OR THE AIR BOX WILL FILL UP WITH OIL.

J219EXT

Ya my 04's subframe is strong as hell, I have slammed that thing down so many times and its still straight. I am picking up a 05 636 today, what type of cage is the best for that