E RacK

when i bleed it from the screw the fluid vome out the m.c. itself where the screw goes in instead of out of the screw. thinkin of changing the m.c. but the spare one i got doesn't have a bleeder screw

AsphaltAssault

i would try bleedin it from the banjo bolt on the master. thats what i do even though i have a bleeder on my hb master

CapitlCityStunt

unscrew the bleeder screw completely and blow it out from the inside with compressed air make sure no dirt in it. also look at your threads inside the mc, make sure it the screw hasnt been missthreaded into MC. most likely the bleeder screw is stopped up with dirt, but if the threads are fucked then its time for a new mc. also when you screwit back in and bleed it, just turn it 1-2 turns at the most, dont turn it way out

E RacK

ight, ima pull the screw tomarrow n check for dirt, the threads feel tight, so it may jus be hardpacked in it, i got an extra master from another bike so ima swap that screw onto my radial n see if it works.
thanks guys